Horn Rod Disassembly I’ve removed the rod from the steering column, have bent the 4 tabs under the button up straight, but the retainer around the horn button will not budge. Does anyone have any suggestions on how to remove it without damaging anything ?
Thanks - Jim |
Re: Horn Rod Disassembly i bore a hole in a piece of wood just a little bigger then the ring stand the rod up so the ring is in the hole and use a small hammer and tap it out.
|
All times are GMT -5. The time now is 08:02 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.