How/where to fill 37 gearbox? 1 Attachment(s)
Just finished up my 36 to 37 gearbox swap and ready to fill my gearbox, assume one of the nuts shown in the attached pic is the fill location? Can I melt/heat up some cornhead grease and put it in a syringe to inject in to the fill hole?
Cant imagine its takes very much? (in hindsight, filling the box prior to mounting in the frame would have been easier) :o |
Re: How/where to fill 37 gearbox? The nut with the star under it is the adjustment. The other one is the fill.
|
Re: How/where to fill 37 gearbox? Quote:
|
Re: How/where to fill 37 gearbox? I use some grease similar to the cornhead grease and just use a grease gun to squirt it in there. Just put the end of the gun into the hole and pump (no pressure, just splurging in).
|
Re: How/where to fill 37 gearbox? Quote:
|
All times are GMT -5. The time now is 06:39 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.