Best home brew penetrating oil? First, I apologize for treading over old territory, but a friend asked. What is the formula for the home brew penetrating oil? Will it last in storage?
Thank you in advance for your assistance and patience.....LouB.:confused: |
Re: Best home brew penetrating oil? I use 50/50 acetone and ATF. Works pretty good. The trick to any penetrating oil is patience and perseverance.
|
Re: Best home brew penetrating oil? What he said. That's the answer.
|
Re: Best home brew penetrating oil? Gotta keep it in a covered container or else the acetone evaporates. Good stuff.
|
Re: Best home brew penetrating oil? Thanks guys, asking for a friend who was having issues posting.....LouB.
|
Re: Best home brew penetrating oil? Don't forget to shake your Acetone/Auto Transmission Fluid mixture, each time you use it. It will separate.
MIKE :) |
Re: Best home brew penetrating oil? 1 Attachment(s)
Quote:
Acetone evaporates very-very quickley, fuel oil and trans fluid works Better. Better yet, Buy a can of PB Blaster, No Muss, No Fuss, and it works as good as Anything. |
Re: Best home brew penetrating oil? I have to go with the 50/50 mix. I had a lathe with a 3 jaw chuck and it wouldn't come off. I tried everything I could think of including a torch and 6' bar. My frienf George suggested actone&ATF. Squirted alittle on it every morning for a few days and it finally screwed off by hand. Great for removing exhaust guides.
|
Re: Best home brew penetrating oil? Quote:
+1 on this. |
Re: Best home brew penetrating oil? i need to try the 50/50 mix with some grease in there....so that it wont evaporate so quickly, maybe you squirt it the area and then put the grease over it..
|
Re: Best home brew penetrating oil? I used the 50/50 mix on my stuck 8RT cylinders. Everyday I took a crow bar and pryed on the flywheel resting it on the bellhousing alignment pin. After several days I saw a little movement, then a little more each day. Finally I was able to turn it 360°.
It works! Shadetree |
All times are GMT -5. The time now is 01:45 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.