The Ford Barn
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Late V8 (1954+) (https://www.fordbarn.com/forum/forumdisplay.php?f=5)
-   -   56 instrument cluster module holes? (https://www.fordbarn.com/forum/showthread.php?t=304911)

56sedandelivery 10-08-2021 03:06 PM
56 instrument cluster module holes?
 

2 Attachment(s)
So have this instrument cluster module that has 5 small hole drilled in it. This is the way I got it but been too long to remember if there was something there or not. Anyone have any idea what these holes are for?


Also anyone know the size of screws that hold the instrument cluster 10848 to the panel 10838? Tried 8/32 but that is not it. I did get metric 4mm to work but did not know they used metric screws back then.

mercman from oz 10-08-2021 05:05 PM
Re: 56 instrument cluster module holes?
 

https://www.fordbarn.com/forum/attac...p;d=1633723585

https://www.fordbarn.com/forum/attac...p;d=1633726079

56sedandelivery is asking what size screws hold the Instrument Cluster?

raceron1120 10-09-2021 05:46 AM
Re: 56 instrument cluster module holes?
 

On cars with vinyl/padded dashboards, there is an 'eyebrow' transition molding that goes there. One of the parts cars I had when my '56 was restored had that dashboard and moldings on it.

KULTULZ 10-09-2021 07:55 AM
Re: 56 instrument cluster module holes?
 

2 Attachment(s)
Quote:
Originally Posted by raceron1120 (Post 2064912)

On cars with vinyl/padded dashboards, there is an 'eyebrow' transition molding that goes there. One of the parts cars I had when my '56 was restored had that dashboard and moldings on it.
DAMN! TALK ABOUT BEING SHARP!


Who would have ever known that? B6A 10987-A

Are those holes on every model, padded dash or not?

Attachments Below -

NOTE -

The retaining screws are 52776-S2. I will try and find my STANDARD PARTS CATALOG and get a sizing.

dmsfrr 10-09-2021 10:01 AM
Re: 56 instrument cluster module holes?
 

1 Attachment(s)
Quote:
Originally Posted by raceron1120 (Post 2064912)
On cars with vinyl/padded dashboards, there is an 'eyebrow' transition molding that goes there. One of the parts cars I had when my '56 was restored had that dashboard and moldings on it.
Is it similar to this chrome trim along the underside of the upper edge?

KULTULZ 10-09-2021 10:06 AM
Re: 56 instrument cluster module holes?
 

2 Attachment(s)
Quote:
Originally Posted by dmsfrr (Post 2064965)

Is it similar to this chrome trim along the underside of the upper edge?
Yes ...

56sedandelivery 10-09-2021 10:08 AM
Re: 56 instrument cluster module holes?
 

That is probably it. When I pulled the part there was no padding on it. They all do not have these holes as I have one that does not have them. This is the better one so probably will just fill them in.

KULTULZ 10-09-2021 10:10 AM
Re: 56 instrument cluster module holes?
 

Do they prominently show? Be a shame to modify an original piece. I bet someone is looking for one.

Ole Don 10-09-2021 02:10 PM
Re: 56 instrument cluster module holes?
 

The only things metric on these cars is the spark plugs.

raceron1120 10-09-2021 03:12 PM
Re: 56 instrument cluster module holes?
 

Quote:
Originally Posted by KULTULZ (Post 2064938)
[SIZE="5"][CENTER]

Are those holes on every model, padded dash or not?
No they're not on every module. The one I used did not have them.

KULTULZ 10-09-2021 10:31 PM
Re: 56 instrument cluster module holes?
 

Quote:
Originally Posted by raceron1120 (Post 2065062)

No they're not on every module. The one I used did not have them.
THANX for the info and speaking loudly so I could here you ... :D

There is only one listed in the MPC so the other must have been dropped at some point.

KULTULZ 10-09-2021 10:36 PM
Re: 56 instrument cluster module holes?
 

Quote:
Originally Posted by dmsfrr (Post 2064965)

Is it similar to this chrome trim along the underside of the upper edge?
FYI -

The molding was used on both the 56 FORD and 57 BIRD.

mercman from oz 10-09-2021 10:52 PM
Re: 56 instrument cluster module holes?
 

https://www.fordbarn.com/forum/attac...p;d=1633791638
1956 Ford Instrument Cluster picture - by dmsfrr

KULTULZ 10-10-2021 06:53 AM
Re: 56 instrument cluster module holes?
 

mercman -

That is the 57 BIRD INSTRUMENT CLUSTER ...

Daves55Sedan 10-10-2021 06:21 PM
Re: 56 instrument cluster module holes?
 

Here's my question; since the Courier is a Mainline series car, did the factory even include padded dashboards in any of the Mainline series cars in '56?
And if not, then did they just install the same instrument cluster housing with the pre-drilled holes, or did they have some that were not drilled for the padded dash trim piece?

56sedandelivery 10-10-2021 06:27 PM
Re: 56 instrument cluster module holes?
 

Probably not. This is most likely off a pick a part car. Back in the day, mid 80s, I would scrounge thru the pick a part yards grabbing whatever off 55/56 fords. Have enough spare parts for two, three cars, LOL. Yeah had the car way back then. So who knows what it came off of. The deal is this one is in better shape the original one that has some deterioration on the back side. Holes are minor so will probably leave them since it is a resto mod anyway.

KULTULZ 10-10-2021 06:43 PM
Re: 56 instrument cluster module holes?
 

Quote:
Originally Posted by 56sedandelivery (Post 2065428)

... this one is in better shape the original one that has some deterioration on the back side. Holes are minor so will probably leave them since it is a resto mod anyway.
Can you do me favor and see if either has a CASTING ID NO and post them?

BTW - You do whatever you feel the need to do with regards to your car. Do not listen to the whining of an CDO a$$-hole such as myself.

If the holes bother you, you do what you want to do.

KULTULZ 10-10-2021 06:46 PM
Re: 56 instrument cluster module holes?
 

Quote:
Originally Posted by Daves55Sedan (Post 2065426)

Here's my question; since the Courier is a Mainline series car, did the factory even include padded dashboards in any of the Mainline series cars in '56?

And if not, then did they just install the same instrument cluster housing with the pre-drilled holes, or did they have some that were not drilled for the padded dash trim piece?
Answered -

Quote:
Originally Posted by raceron1120 (Post 2065062)

No they're not on every module. The one I used did not have them.

KULTULZ 10-10-2021 07:01 PM
Re: 56 instrument cluster module holes?
 

1 Attachment(s)
Never know. If it is a RESTO-MOD, it would look sharp (IMO) with a padded instrument panel. They are available repro.

Sorry about that piece for your headliner. I could not find a reference in the MPC.

56sedandelivery 10-11-2021 12:05 PM
Re: 56 instrument cluster module holes?
 

Quote:
Originally Posted by KULTULZ (Post 2065432)
Can you do me favor and see if either has a CASTING ID NO and post them?

There does not appear to be any casing numbers on either one. The one with the holes in it on the back lower right side there is: KS-2 49204. Those are the only number on them. The one without the holes has no numbers at all.


All times are GMT -5. The time now is 01:38 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.