54 flat head rad changed lower rad hose and put 4 gallons anti freeze, now doesn't seem to be circulating
is there an easy way to get air out ??? |
Re: 54 flat head rad Pull the upper hoses and fill until water begins to come out of the thermostat housings. Install the upper hoses and continue filling to within 2 inches of the radiator filler neck. Run the engine and observe when the thermostats open. You should see activity at that point.
|
Re: 54 flat head rad thx got lucky this morning, when i started the car up it bled itself
now running at 180* |
All times are GMT -5. The time now is 02:32 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.