oilpan aligning jig I recently got a krwilson pan jig but its missing all the bolted on parts. If anyone has one that would be willing to take some detailed measurements and/or pics for me please email [email protected] id like to take a stab at making the parts that are missing. the only parts that mite be a problem is the cast disk at the rear. Thanks...al
|
Re: oilpan aligning jig Look up Pete Rich in Forestville Ca. In Northern Calif., he has one as far as I know.
He's a nice guy and might do that for you. |
Re: oilpan aligning jig thanks for the tip...don't happen to have contact info do you?
|
Re: oilpan aligning jig |
Re: oilpan aligning jig The member Erik Barrett has posted here before about having the jig. Search the membership list here for contact details.
Also 'OSO HANDY RESTORATIONS Specializing in Model T Fords 320-293-1953 [email protected] |
Re: oilpan aligning jig I made all the parts for mine, copying ones from our friend Pete Rich. I can send pics. Simple machine work, all referenced off the surface of the jig and the dowel pins. Email for info.
Regards, Erik. [email protected] |
All times are GMT -5. The time now is 01:49 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.