Now that I found my pump, anyone know of a kit?
 

Thanks to the Barn members I was able to locate the LB oil pump

for a modification project to be used in my 4 cylinder B' engine.
So far I have not been able to locate anyone that sells a rebuild kit
for these LB oil pumps (gears & shaft) and have tried the major

suppliers, but with no results. Does anyone know of a source for
the kits that i need? Thanks, Steve

Re: Now that I found my pump, anyone know of a kit?
 

If there are no circles cut in the housing or base, no rings wore on the shaft, then it does not need rebuilding.

Re: Now that I found my pump, anyone know of a kit?
 

i agree. if not worn out, then just new bushings for the shaft would all that is necessary. the bottom cover can be flipped over too for a new surface. smooth it up with 300 wet on a flat surface like glass or a saw table

Re: Now that I found my pump, anyone know of a kit?
 

Steve,

I'm not familiar with these. Can you post a few photos of one please?

Thanks!

Re: Now that I found my pump, anyone know of a kit?
 

Here is an exploded view: