The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   over drive solenoids (https://www.fordbarn.com/forum/showthread.php?t=133451)

52merc 03-07-2014 09:24 PM

over drive solenoids
 

anyone used 1 of the new Chinese o/d solenoids?? I have 1 it works on bench test but on the car nothing so put my old 1 back on perfect ????:confused:

Drbrown 03-07-2014 09:59 PM

Re: over drive solenoids
 

You may have seen this before but thought I try sending attached to you regarding repairing OD solenoids. Dan

Drbrown 03-07-2014 10:07 PM

Re: over drive solenoids
 

1 Attachment(s)
Attachment 168932 had trouble sticking on attachment. Dan

52merc 03-07-2014 10:26 PM

Re: over drive solenoids
 

thanks for that dr brown what I cannot figure out is why this new 1 wont work in the car I did notice that the coil spring is not as heavy as old o/ds it test bench works but wont in car this is crazy

Drbrown 03-08-2014 12:07 AM

Re: over drive solenoids
 

I was once told that a common problem is that the OD is not grounded - i.e. run a gnd wire to frame. Regardless, I expect this old-timer OD builder in Ohio can help .... gather as much info you can before you phone.

Lloyd Young, 614-837-7440 or 614-837-7832

52merc 03-08-2014 12:14 AM

Re: over drive solenoids
 

thanks for that I might just try a ground to the frame to see whats what trev nz:)

Kahuna 03-08-2014 10:27 AM

Re: over drive solenoids
 

Trev
I think the one that works is the one I sent to you some 10 years ago. If so, the warranty is OVER. ha ha ha
Jim

52merc 03-08-2014 02:31 PM

Re: over drive solenoids
 

jim you made my day mate!!! 8.30 sunday morning here and you gave me a great laugh you aint got another I suppose with a longer gaurente ??

lol yes mate it has worked well its like my body overworked and in need of a real good tune up,,,hows the car coming on regards trev:)

52merc 03-08-2014 05:56 PM

Re: over drive solenoids
 

btt

Kahuna 03-09-2014 12:22 AM

Re: over drive solenoids
 

Just having a bit of fun with you, Trev. Car's coming along
Cheers
Jim


All times are GMT -5. The time now is 08:25 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.