Fender cover
 

What to use for a fender cover when working on the Model A. The towel slides off & so do the tools. Is there something made for the Model A ??

Re: Fender cover
 

Snyder's has a cover as does MARC but the MARC one tends to slide off also. I hold it on with magnets.

https://www.snydersantiqueauto.com/P...earchByKeyword

Re: Fender cover
 

California Car Cover sells fender covers (https://www.calcarcover.com/search/Fender%20cover)

I think you can get one with a Ford Logo if that is important to you.

David Serrano

Re: Fender cover
 

Expensive but appear top of the line
https://dr-doolin.com/fender-blankets

Re: Fender cover
 

nice!!

Re: Fender cover
 

Harbor freight’s fender Mat for only $10 does a very good job.


PITTSBURGH AUTOMOTIVE Fender Cover Work Mat - Item 96177

Re: Fender cover
 

I use a yoga mat. Stays in place and when not in use, rolls up.

Re: Fender cover
 

I use a nice Used bath towel, held in place by two rare earth magnets.
I really like it.

Re: Fender cover
 

Re: Fender cover
 

Bathroom rug with a rubber backing.

W. Michael

Re: Fender cover
 

I’ll have to get one of these. It has four magnets; which should keep it in place. Thanks for the heads up.

Re: Fender cover
 

Just leave the yoga mat on your fender and do your yoga on top of the fender!:eek:

Re: Fender cover
 

The Snyder mat works pretty good. It has holes cut into it to go around the headlight bars and hold it in place. It also has slots marked on it that you can cut if you have fender mounted spares. Works great and is meant specifically for the A.

Re: Fender cover
 

I use fender blankets. Sure they may slip, but I just put back in place. https://www.sears.com/globe-house-pr...SPM13420311719

Re: Fender cover
 

Those look nice but N/A. :(

Re: Fender cover
 

I saw that and was just showing it as a sample of what I use. I got mine from the service that washed our shop rags.

Re: Fender cover
 

I use a leather hide, left over from an upholstery job.

Re: Fender cover
 

I use a moving blanket which works, although slides off occasionally,

Re: Fender cover
 

I have had the Snyder covers for years. I like them.

John

Re: Fender cover
 

About a hundred years ago I bought a Craftsman cover from Sears. It has magnets to keep it in place. Works great, wish I had another one. I also have a couple of the ones that are "made for a Model A", but they don't work very well and keep falling off, despite the fact that they wrap around the headlight bar.