pistons for a 21 stud Are pistons for a 36 available in a larger oversize than .060?
John |
Re: pistons for a 21 stud Quote:
Phil NZ |
Re: pistons for a 21 stud An 1/8 (.125) over is 3 3/16 which is standard bore for 237 inch V-8s
|
Re: pistons for a 21 stud Flat top or crowned?
|
Re: pistons for a 21 stud Quote:
Thanks,John |
Re: pistons for a 21 stud I just did a 36 with 3 3/16 + .020 pistons - domed pistons.
|
Re: pistons for a 21 stud John,
Be mindful of core shift on these early blocks. Some can go 3 3/16 + .020 like Jack just said but just as many are kaput at 3 1/16 + .060.........been there. Charlie ny |
All times are GMT -5. The time now is 05:21 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.