The Ford Barn - King Pins

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model-A (https://www.fordbarn.com/forum/forumdisplay.php?f=17)

- - King Pins (https://www.fordbarn.com/forum/showthread.php?t=122030)

bill44

11-02-2013 12:45 PM

King Pins

City: Auburn

State: Ca

I am looking for a supplier that has king pins that are flat on top for Bendix conversions. I need the ones that are made for Model A spindles. I could cut them, but the new ones are a lot better and don't have the hole in the center.

quickchange

11-02-2013 01:54 PM

Re: King Pins

Would not the V8 ones work ? hope this helps,

redmodelt

11-02-2013 03:52 PM

Re: King Pins

Try Speedway.

bill44

11-03-2013 10:11 PM

Re: King Pins

The V-8 king pins have the notch of the lock bolt in a different place. You must have ones made for a Model A spindle. Of course you can change the spindles, but I would rather not go to that expense.

WILLIAM A KETCH

11-04-2013 08:16 AM

Re: King Pins

Quote:

Originally Posted by bill44 (Post 757975)

the last set i did i machined the dome off the top they worked great bill

All times are GMT -5. The time now is 09:55 PM.