1941 11-A Distributor Cam Plate 1 Attachment(s)
Is the Detent in the outer edge of this 11-A cam plate there for a reason or is it it a blend out of damage?
|
Re: 1941 11-A Distributor Cam Plate That is a blem, I’ve run across a couple like that and the plate needs to be replaced as it will rip the leather pad off the vacuum brake plunger
|
Re: 1941 11-A Distributor Cam Plate It took me a while to get an 11-A core to rebuild and I’m unsure I’lll be able to get another here. Do you see any problem with welding up the damage area and reprofiling to original contour? I am in New Zealand at the moment waiting for the Australian Queensland borders to re open, great place to isolate.
|
Re: 1941 11-A Distributor Cam Plate That's sure what I'd do. If you can match and polish,it should work as good as ever.
Terry |
Re: 1941 11-A Distributor Cam Plate Ramjet I believe that would work if it’s perfect workmanship. Then polish with no rough spots. You couldn’t be Quarantined in a better place. Eat all the fish n chips you can for me please.
Cheers Tony |
All times are GMT -5. The time now is 12:04 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.