Need Installation instructions Glove box 45 Ford pick up Hey guys I am looking for some help on installing my glove box and box bumpers. Wondering if somebody has instructions out there.
|
Re: Need Installation instructions Glove box 45 Ford pick up The bumpers fit into the holes at the top of the opening in each corner. the cardboard box should have some small metal plates that are in the edge of the box and are set up to take screws that come with the box. The the box slides over the inner metal lip of the opening and the screws go through the holes in the metal lip and into the small metal plates in the glove box.
|
Re: Need Installation instructions Glove box 45 Ford pick up TJ,
Thank you. I figured it was easy. Oh, does the glove box door and spring mount first? |
Re: Need Installation instructions Glove box 45 Ford pick up It's been awhile, but as I recall the glove box goes in first. I'm thinking that the bottom of the box sits on the inside of the lower lip and then the door hinge sandwiches the bottom of the box between the hinge and the metal lower lip.
|
Re: Need Installation instructions Glove box 45 Ford pick up That makes sense. I appreciate your help.
|
All times are GMT -5. The time now is 12:43 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.