Mart's update: 32 radiator mods. Rich F1 progress. Lathe job. 32 Frame recovery. bnb2
 

Hello. Welcome to another Bits and bobs video from Mart's Garage. This week I show you some mods made to a pretty clapped out 1932 Ford radiator. Yes, I said 32 Ford. I talk about my 32 Sedan. We drop in at Richard's, and see how the F1 is progressing. I make some parts on the lathe and only show a bit of it. Finally I get the 32 frame down from the rafters so I can start dicking with it. I hope you enjoy the mixed bag format.

https://youtu.be/lReK05EFvPQ

Cheers!
Mart.

Re: Mart's update: 32 radiator mods. Rich F1 progress. Lathe job. 32 Frame recovery.
 

Thanks Mart, you had my attention taking down that frame!

Re: Mart's update: 32 radiator mods. Rich F1 progress. Lathe job. 32 Frame recovery.
 

another fun show mart. interesting job on those pins

Re: Mart's update: 32 radiator mods. Rich F1 progress. Lathe job. 32 Frame recovery.
 

You do get a lot accomplished!

Re: Mart's update: 32 radiator mods. Rich F1 progress. Lathe job. 32 Frame recovery.
 

Busy busy busy! I would have loved to have be able to see the “corrupted”’video (now that sound a little naughty!). I was thinking of doing the same thing to a model B rad I have but was warned of of it due to a real v8 rad is thicker than one for a four cylinder. By the way, are you sure yours was is a ‘32 rad? I was told mine definitely is but if differs from yours in the lower tank area is much shallower one the side without the outlet.