Pressurized Radiator A recent post about banger radiators brought up a suggestion of a 4# pressurized cooling system.
What would be a recommended size/volume of the overflow tank in such a system? What would be the best location to mount the overflow tank in a regular Model A engine compartment with a hood? Thank in advance Fordbarn. Peace, Phred |
Re: Pressurized Radiator Phred,
Go to Brasswork's web site: https://www.thebrassworks.net/ Look under the heading of Parts and Pieces; you will find overflow tanks. I use the 15" stainless steel in my cars. The 13" would be large enough if you have a space problem. At least one size of these same overflow tanks are available from Snyder's. I mounted one on the firewall the other I mounted on the right side of the radiator. Good Day! |
Re: Pressurized Radiator Good advice Dave!
|
Re: Pressurized Radiator On my roadster I filled the radiator and then ran it with the 4lb cap on until it quit leaking out the overflow. I then filled it again, noting how much it took.
That was the size overflow tank I needed. John |
All times are GMT -5. The time now is 06:44 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.