Flathead V8 machine shop in Texas Guys,
I am am new to the forum and new to flatheads. I am looking for a good shop in Texas to perform the machine work on a flathead out of a 1951 F1 I just purchased. The truck is completely stock and I plan on keeping it as close to that as possible. I can do the disassembly and assembly. I just need a good machine shop. Preferably one that has been working on flatheads since this one was new! Michael |
Re: Flathead V8 machine shop in Texas It's a big state. What part are you in?
|
Re: Flathead V8 machine shop in Texas Tinker's Motor Supply, Dallas, Texas
214-688-1067 They have done the machine work on 2 blocks for me and do a great job. |
Re: Flathead V8 machine shop in Texas Thanks Ed. Rotorwrence - I am in Austin. You are right, it is a big state!
|
Re: Flathead V8 machine shop in Texas Thank you Ed!
|
Re: Flathead V8 machine shop in Texas There is bound to be a good shop up there somewhere. The forum boss, Ryan, lives up that way. Some of the HAMB guys up that way may know better than I do. I'm sure a few more Austin folks check in here too. The shop I used to use here in SA closed down quite a while ago so I haven't tried any others yet.
|
Re: Flathead V8 machine shop in Texas Thank you!
|
Re: Flathead V8 machine shop in Texas Automotive Engine Services, Nacogdoches, Texas, 936 569 1164, Michael Pinkston. They have done two engines for me. Very pleased.
|
Re: Flathead V8 machine shop in Texas Welcome to the 'Barn. Have fun with your flathead and pickup. Mike
|
Re: Flathead V8 machine shop in Texas If you want to e closer to home, I used Parks Engine Service, Seguin TX. Rick Pridgen, the owner loves flatheads and has rebuilt a bunch of them. 830-379-4562. Good luck!
|
Re: Flathead V8 machine shop in Texas Thanks,Chris.Wrote his number down.Webb.
|
Re: Flathead V8 machine shop in Texas Thanks everyone. Looks like I have some great options!
Michael |
Re: Flathead V8 machine shop in Texas I'm also looking for a reputable shop in Texas. I'm near Dallas, but willing to drive as needed. Do any of the above shops have experience with babbitt motors?
|
Re: Flathead V8 machine shop in Texas I want to revive this thread as I've just completed the tear down. Tinkers doesn't seem to have a working number. May be closed? Any other suggestions in DFW?
|
Re: Flathead V8 machine shop in Texas Try Dave Plubell in Garland. Good guy.
|
Re: Flathead V8 machine shop in Texas Just received a response from Dave. No longer in business unfortunately.
|
Re: Flathead V8 machine shop in Texas I remember seeing Rex Rod & Chassis and reference to flathead work. Martin Bros Lane, Johnson City, Tx. I believe he's Vern Tardel's brother.
|
Re: Flathead V8 machine shop in Texas Thanks for the input Tony. I believe I've settled on a shop two hours outside of Dallas/Fort Worth (hoping to swing by this week). It's unfortunate many of the shops that worked on these motors have gone out of business.
|
All times are GMT -5. The time now is 11:13 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.