Seat Removal
 

We have a 1929 Model A fordor Briggs leather back. I am recovering the seats and can’t see how to remove the back of the front seat and the side wings on it. Anyone have any suggestions or diagrams?

Re: Seat Removal
 

If I understand what you are asking, I don't think they are removable easily??

Re: Seat Removal
 

I understand you said you had a '29 BUT on my '30 BRIGGS Blindback the back is nailed to the bottom wood all the way around. The material is stretched over the metal and nailed under the bottom wood. Hope that helps!

Re: Seat Removal
 

Thanks, Sounds like I won’t be able to take that out to recover it.

Re: Seat Removal
 

Thanks

Re: Seat Removal
 

I have a 30- 3 window four door and a 31 s/w and they both are attached to the wood around the seat frame.

Re: Seat Removal
 

I have a leatherback briggs. There is a metal bracket holding the seat back to the door pillar, about at upper arm height when sitting in the seat. The bottom seat frame is screwed to the floor. Take the side brackets off, remove the base screws, and the whole seat frame will come out.

Re: Seat Removal
 

I'm tall, so when I had my seat out I moved it back a couple inches. It did require fabricating new brackets for the seat back to door post.

Re: Seat Removal
 

Thanks, Sounds like this will work.