cyclone head......... saw a discussion on the cyclone heads........
was meandoring through ebay and saw this one. what would this 6 cylinder head fit on? certainly not the 32 ford suggested? |
Re: cyclone head......... |
Re: cyclone head......... maybe Dodge
|
Re: cyclone head......... Chris Craft six cylinder boat head
|
Re: cyclone head......... Interesting chamber design and plug placment.
|
Re: cyclone head......... 1 Attachment(s)
Shelby got it. I think Chris Craft/ Hercules model K.
|
Re: cyclone head......... Quote:
All we need to do is ask for information, about ??? and an answer will appear. Thank you to all for sharing your knowledge, it's what makes this hobby the greatest. |
Re: cyclone head......... It also could be a Cyclone for the flathead Ford 6. We used to run against one in a jalopy, ran good too. In those days 4 and 6cyl. jalopy engines could run more than 1 carb, etc. Us 4-bangars could even run OHV heads, not many did and the one time I did not many could stay with it, until I broke a main cap. I ran four 81's!
|
Re: cyclone head......... I ran four 81's!
would love to see a photo |
Re: cyclone head......... Not sure I have a pic running the 4, and I'm not smart enough to post here anyway, on FB yes, here no. I ran 4 mostly on alcohol/nitro to get more reserve in the bowls. Fuel takes twice as much on alky, and more on nitro, and the needle and seat cannot pass enough to keep the fuel level where it belongs, destroys pistons and such minor things.
|
Re: cyclone head......... I saw somewhere a fellow was building an A engine and he put a new Cyclone head on. I recall he got it from H and H but I don’t see it in the online catalog
|
Re: cyclone head......... guy makes them out in Cali- was his Dads business. he still makes them from time to time
and is on the HAMB |
Re: cyclone head......... Cyclone Kevin on the hamb and super nice guy
|
All times are GMT -5. The time now is 03:56 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.