The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Oil Breather tube 20 inch flex tube (https://www.fordbarn.com/forum/showthread.php?t=289019)

fredski53 10-21-2020 05:35 PM

Oil Breather tube 20 inch flex tube
 

Greetings and salutations; what are the people's thoughts of adding a oil breather flex tube to your engine? Wife and I went on a 75 mile ride this weekend and all she did was complain about the smell of oil flumes in the car! Do I add a breather tube or don't let her ride anymore?

Bob-A 10-21-2020 05:40 PM

Re: Oil Breather tube 20 inch flex tube
 

Breather tube....it'll be cheaper in the long run.:)



Bob-A:D

WHN 10-21-2020 05:45 PM

Re: Oil Breather tube 20 inch flex tube
 

Breather tube really helps. Keeps firewall clean, no funny smells.

Enjoy.

Big hammer 10-21-2020 05:48 PM

Re: Oil Breather tube 20 inch flex tube
 

How much blow by do you have? Engine overhauls aren't cheap, neither are divorces !

rfitzpatrick 10-21-2020 06:20 PM

Re: Oil Breather tube 20 inch flex tube
 

Like mine -- the only problem I had was when changed oil, didn't put the funnel down far enough, before discovered oil I was adding was going to the floor thru the breather line.

Conaway2 10-21-2020 06:50 PM

Re: Oil Breather tube 20 inch flex tube
 

I’ve been using an old Fumaze breather cap/tube for 50 years - no more complaints from passengers about the oil fumes.

RUNNERBUN 10-21-2020 07:47 PM

Re: Oil Breather tube 20 inch flex tube
 

Put the breather tube in, remember happy wife = happy life.

eagle 10-21-2020 07:57 PM

Re: Oil Breather tube 20 inch flex tube
 

Maybe SHE needs the "breather tube". Seriously though, I have one on my A and I don't notice any oil fume smell in the car.

Alaska Mike 10-21-2020 09:34 PM

Re: Oil Breather tube 20 inch flex tube
 

Several friends that have did the "divorce thing" all agree, "Cheaper to Keep'er"

PalAl 10-21-2020 09:53 PM

Re: Oil Breather tube 20 inch flex tube
 

1 Attachment(s)
Installed one about 4 years ago, really helps with fumes and oil mist. I like to keep my engine compartment tidy. This picture was taken about a year after the install. A long neck funnel is needed for oil changes.

Synchro909 10-21-2020 09:58 PM

Re: Oil Breather tube 20 inch flex tube
 

You'll be able to stop the fumes coming in by opening the windscreen a little and closing the other windows, assuming you are in a closed car. Doing that gives a slight positive air pressure in the car and stops the fumes entering. I do that to stop the HOT air coming in around the pedals. (On a RHD car, the exhaust pipe is between the clutch and brake pedals)

bdtutton 10-21-2020 11:03 PM

Re: Oil Breather tube 20 inch flex tube
 

I have very little blow by from my engine so there was hardly any smell, but my wife could smell it. The breather tube helped.

old31 10-22-2020 03:41 AM

Re: Oil Breather tube 20 inch flex tube
 

Geee, it would be cheaper to leave the wife at home. Those breather tubes are $35.00.

Actually I installed one and they work great.

fredski53 10-24-2020 07:29 PM

Re: Oil Breather tube 20 inch flex tube
 

Thanks for all the positive responses! The engine is a fresh rebuild, but the wife has a sensitive nose! I'll tell to let Santa get one for Christmas

PalAl 10-24-2020 09:10 PM

Re: Oil Breather tube 20 inch flex tube
 

Quote:

Originally Posted by fredski53 (Post 1944880)
Thanks for all the positive responses! The engine is a fresh rebuild, but the wife has a sensitive nose! I'll tell to let Santa get one for Christmas

Also tell Santa to bring a long funnel to get the new oil past the tube

160B 10-24-2020 09:57 PM

Re: Oil Breather tube 20 inch flex tube
 

6 Attachment(s)
If you keep your eye out you may find a FUMAZE at a swap meet. There are originals and reproductions.

The originals have are marked FUMAZE PAT. PEND P.O.B. MFG.CO CINN. O. and the tube is seamed.

The reproductions are marked FUMAZE PATENTED IN USA, and the tube is not seamed, it is solid pipe.

see below photos

Ruth 10-25-2020 12:01 AM

Re: Oil Breather tube 20 inch flex tube
 

Quote:

Originally Posted by 160B (Post 1944922)
If you keep your eye out you may find a FUMAZE at a swap meet. There are originals and reproductions.

The originals have are marked FUMAZE PAT. PEND P.O.B. MFG.CO CINN. O. and the tube is seamed.

The reproductions are marked FUMAZE PATENTED IN USA, and the tube is not seamed, it is solid pipe.

see below photos

Do you need to cut a hole in the engine pan when using the Fumaze? Or remove the engine pan?? If so I would rather use the flex tube.

Cory Moffat 10-25-2020 12:24 AM

Re: Oil Breather tube 20 inch flex tube
 

A total rebuild is funner and a whole lot cheaper. Also can be justified as it's for her.
Because Dear I love you.

CarlG 10-25-2020 01:42 AM

Re: Oil Breather tube 20 inch flex tube
 

Quote:

Originally Posted by Ruth (Post 1944929)
Do you need to cut a hole in the engine pan when using the Fumaze? Or remove the engine pan?? If so I would rather use the flex tube.

No alterations to your engine pan. In fact, the engine pan adds to it's effectiveness. I've been using one for 10 years now. works great!

McMimmcs 10-25-2020 02:05 AM

Re: Oil Breather tube 20 inch flex tube
 

kick her ass to the curb. Once you fix the fumes problem she’ll find something else to complain about.


All times are GMT -5. The time now is 01:08 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.