49 horn the horn on the 49 quite working. I under stand if you push down on the horn ring and turn left the horn can be removed then you can clean the contacts? when I remove the horn ring will anything fall out? thanks for any help. Jack
|
Re: 49 horn Did you try running power direct to the Horn?, my '41 also has a horn relay not sure if '49 does another point of failure. I would test all that before I took wheel apart. Could also be a broken wire in steering column.
|
Re: 49 horn The horn ring will have a spring to hold the tension on it but it won't fly out after the tension is released. The rubber ring is the major problem.
This is a link for instructions by Bruce Lancaster and it's as good as it gets. https://www.fordbarn.com/forum/showthread.php?p=681371 |
Re: 49 horn Thanks; Rotorwrench great info. Jack.
|
All times are GMT -5. The time now is 12:25 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.