The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   28 Tudor Emergency brake location (https://www.fordbarn.com/forum/showthread.php?t=284726)

Cory 07-28-2020 08:43 PM

28 Tudor Emergency brake location
 

Hello, so I bought a 1928 Ford model a Tudor at a auction last week. When I went to order a Front floormat all of the parts shop on on line are telling me 28-29 emergency brakes are behind the gearshift lever. Mine is to the right. I went ahead and ordered the mat for the 30-31 because it looked right. Now IÂ’m starting to worry about if itÂ’s supposed to be in a different spot what else might be wrong. Now for my question. Is my emergency brake in the wrong place and if so what had to be changed to put it there?

Thanks

Mike Peters 07-28-2020 09:31 PM

Re: 28 Tudor Emergency brake location
 

Originally, the first cars built in 1928 had the emergency brake located to the left of the driver, adjacent to the kick panel. Later in '28 it was moved to the front of the shift lever. Sometime later, and I'm not looking at the judging standards, it was moved to the right of the shift lever. You have a 30-31 transmission tower in your 1928 Tudor. To move it back to the 1928 configuration, you will need to find a 28-29 shifter tower. That may involve other linkage as well, I'm not sure about that.

frank55a 07-28-2020 09:31 PM

Re: 28 Tudor Emergency brake location
 

If your "A" is a mid to late 28 the emergency brake lever should be in front of the gear shift lever. If it is to the right then at some time in the past the transmission could have been changed or at least the transmission cover was changed. Early to mid 28s the lever was to the left of the clutch petal.

Cory 07-29-2020 02:00 AM

Re: 28 Tudor Emergency brake location
 

Thank you both for your insight

Dean Lemoine 07-29-2020 05:02 AM

Re: 28 Tudor Emergency brake location
 

To relocate the handle’s position, wouldn’t the E-Brake cross shaft need to be replaced also, or would the rod to the cross-shaft still work? Asking for a “friend”.

Cory 07-30-2020 02:00 AM

Re: 28 Tudor Emergency brake location
 

For what it’s worth the cross shaft in mine appears to be a 28/29. It has a Grease Zirk on both ends. According to my service manual 30/31 dose not have them.

shew01 07-30-2020 08:30 PM

Re: 28 Tudor Emergency brake location
 

Quote:

Originally Posted by Cory (Post 1914572)
For what it’s worth the cross shaft in mine appears to be a 28/29. It has a Grease Zirk on both ends. According to my service manual 30/31 dose not have them.


I have a 31. It doesn’t have grease fittings o it’s cross shaft.


Sent from my iPhone using Tapatalk


All times are GMT -5. The time now is 02:19 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.