30-31 reinforced exhaust manifold City:
San Diego
State:
Ca
Price:
In ad
2 Attachment(s)
This is a late reinforced exhaust manifold that was introduced in mid 1930 to the end of production, it is in fairly good condition, however there is a 1/16 to 1/8 drop at the #4 port, which can be overcome using a few of the alignment rings and the 2 piece copper gaskets.
There is no rust pitting, the entire manifold as had a coating added, maybe ceramic ?, and as been flaking off, there is some pitting at the # 1 port probably from a leaking water pump, the manifold to muffler pipe is OK. I gave the manifold a light coating of flat black to enhance the condition, these manifolds are hard to find and not made anymore, with a media blasting I believe it would look good. I will ask $50.00 or BEST OFFER plus shipping. If more pictures requested PM me your e-mail address, thanks for looking. MAKE REASONABLE OFFERS, MAYBE BEST IF PICKED UP LOCALLY, TO SAVE ON MAILING. |
Re: 30-31 reinforced exhaust manifold To the top.
|
Re: 30-31 reinforced exhaust manifold Up we go.
|
Re: 30-31 reinforced exhaust manifold I will accept $25.00 please come and pick it up --- cleaning out the shelves, or will scrap , thanks again for looking.
|
Re: 30-31 reinforced exhaust manifold [QUOTE=Brian T;1672705]This is a late reinforced exhaust manifold that was introduced in mid 1930 to the end of production, it is in fairly good condition, however there is a 1/16 to 1/8 drop at the #4 port, which can be overcome using a few of the alignment rings and the 2 piece copper gaskets.
There is no rust pitting, the entire manifold as had a coating added, maybe ceramic ?, and as been flaking off, there is some pitting at the # 1 port probably from a leaking water pump, the manifold to muffler pipe is OK. I gave the manifold a light coating of flat black to enhance the condition, these manifolds are hard to find and not made anymore, with a media blasting I believe it would look good. NEW PRICE $25.00 ----- TO BE PICKED UP, THANKS FOR LOOKING. WILL SCRAP SOON. |
Re: 30-31 reinforced exhaust manifold Back up
|
All times are GMT -5. The time now is 05:45 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.