The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   wheel question (https://www.fordbarn.com/forum/showthread.php?t=268399)

ford31 08-25-2019 08:50 AM

wheel question
 

will tractor tire fit a 29 aa split rim for my doodlebug

d. 08-25-2019 05:04 PM

Re: wheel question
 

maybe you'd want to run this by a tire dealer...he would know what would work safely.

Railcarmover 08-25-2019 07:24 PM

Re: wheel question
 

https://www.amazon.com/ATV-MASTER-DE...%2C199&sr=8-14

Do some homework on this tire,its a 20",8 inches wide at the tread,it says tubeless but you can probably run a tube with a flap..rim width will be your biggest issue.that being said you can foam fill them,so things like 'holding air' wont be a problem

rotorwrench 08-26-2019 09:25 AM

Re: wheel question
 

We used a lot of foam fill here in TX due to mesquite thorns. It doesn't last very well here. It may be the heat but it also might just be the nature of the stuff.

They make rear tractor tires in various sizes and widths including 20-inch but they can get expensive. Another option may be the military type tread pattern that Coker is reproducing now. Pete's tire barn shows some narrow 20-inchers.


All times are GMT -5. The time now is 03:42 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.