Mart's Update: 1932 Ford Sedan Project Pt3. Frame paint. Crossmember fit. Rich's F1. Hello! Welcome to another exciting video from Mart's Garage. It's time to clean up the 1932 Ford frame and slap some paint on it. We also need to check that Richard hasn't been slacking on the F1. Lastly I custom fit some bolts to bolt the front crossmember in.
You might see from the intro that things have moved on a bit. All will be covered in future episodes. Thanks for watching. Mart. https://youtu.be/jA0Gs7Gxsxw |
Re: Mart's Update: 1932 Ford Sedan Project Pt3. Frame paint. Crossmember fit. Rich's I was wondering if anyone had any thoughts on Richard's 8BA block. Is that amount of damage usual or out of the ordinary?
Mart. |
Re: Mart's Update: 1932 Ford Sedan Project Pt3. Frame paint. Crossmember fit. Rich's Interesting bit of work from Mart! I am doing much the same with an earlier crossmember that had been installed by a previous owner using carriage bolts (coach bolts in UK?) that were modified in the same manner as shown by Mart.
I am curious about the grade of bolt recommended as replacement for the original rivets. The stuff I pulled from my frame appear to be only US Grade 2 metallurgy. is that sufficient? |
Re: Mart's Update: 1932 Ford Sedan Project Pt3. Frame paint. Crossmember fit. Rich's Think that crack is frozen block crack
|
Re: Mart's Update: 1932 Ford Sedan Project Pt3. Frame paint. Crossmember fit. Rich's Quote:
Unless I'm doing it wrong, looking up various spec sheets and conversion charts, metric grade 8.8 appears to be somewhere between grade 5 and grade 8, towards the grade 5 end. Mart. |
Re: Mart's Update: 1932 Ford Sedan Project Pt3. Frame paint. Crossmember fit. Rich's The block is no doubt a freeze crack, is it cracked anywhere else ?
|
Re: Mart's Update: 1932 Ford Sedan Project Pt3. Frame paint. Crossmember fit. Rich's Speaking of pan rail cracks, did the 59 AB that you put in your pickup hold up alright? :)
Mike |
Re: Mart's Update: 1932 Ford Sedan Project Pt3. Frame paint. Crossmember fit. Rich's Quote:
|
All times are GMT -5. The time now is 09:02 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.