The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Pictures of a 1952 Ford car automatic steering column (https://www.fordbarn.com/forum/showthread.php?t=338023)

38 Conv 04-26-2024 11:47 AM

Pictures of a 1952 Ford car automatic steering column
 

3 Attachment(s)
Need pictures of a 1952 Ford CAR automatic steering column. want to see if it is what is installed in my truck

jplutz 04-26-2024 10:57 PM

Re: Pictures of a 1952 Ford car automatic steering column
 

38,
Do you need interior or engine compartment pics? or both?
I have a 52 Mainline Fordo-Magic V8. JPL

mercman from oz 04-27-2024 01:16 AM

Re: Pictures of a 1952 Ford car automatic steering column
 

https://www.fordbarn.com/forum/attac...p;d=1714198433

https://www.fordbarn.com/forum/attac...p;d=1714198420

1952 Ford with Fordomatic from the Sales Brochure.
Is this what you are looking for?

38 Conv 04-27-2024 07:24 AM

Re: Pictures of a 1952 Ford car automatic steering column
 

4 Attachment(s)
I need the automatic part and shift indicator--what I have is I THINK a 1951-52 steering column automatic with a 1953-56 F-100 steering wheel in my 54 F-100 and want to go a SMALLER steering wheel-- Column & steering wheel in pictures is what is installed in my truck--Thanks

petehoovie 04-27-2024 09:55 AM

Re: Pictures of a 1952 Ford car automatic steering column
 

Quote:

Originally Posted by 38 Conv (Post 2307164)
I need the automatic part and shift indicator--what I have is I THINK a 1951-52 steering column automatic with a 1953-56 F-100 steering wheel in my 54 F-100 and want to go a SMALLER steering wheel-- Column & steering wheel in pictures is what is installed in my truck--Thanks

https://www.fordbarn.com/forum/attac...8&d=1714220535

https://www.fordbarn.com/forum/attac...9&d=1714220535

https://www.fordbarn.com/forum/attac...0&d=1714220535

jplutz 04-27-2024 09:57 AM

Re: Pictures of a 1952 Ford car automatic steering column
 

7 Attachment(s)
38,
Attached, find some pics of my interior. It's the 52 on my avator. Sorry for the poor quality, my yard is swarming with gnats; they were all over me in the car. I have 2 bar steering wheel, I see that yours is a 3; perhaps from a 51. Hope this helps. Good luck, JPL

petehoovie 04-27-2024 10:03 AM

Re: Pictures of a 1952 Ford car automatic steering column
 

Quote:

Originally Posted by jplutz (Post 2307202)
38,
Attached, find some pics of my interior. It's the 52 on my avator. Sorry for the poor quality, my yard is swarming with gnats; they were all over me in the car. I have 2 bar steering wheel, I see that yours is a 3; perhaps from a 51. Hope this helps. Good luck, JPL

https://www.fordbarn.com/forum/attac...1&d=1714229525

https://www.fordbarn.com/forum/attac...2&d=1714229525

https://www.fordbarn.com/forum/attac...3&d=1714229525

https://www.fordbarn.com/forum/attac...5&d=1714229525

https://www.fordbarn.com/forum/attac...7&d=1714229525

jplutz 04-27-2024 12:37 PM

Re: Pictures of a 1952 Ford car automatic steering column
 

Thanks pete. JPL

jplutz 04-27-2024 12:41 PM

Re: Pictures of a 1952 Ford car automatic steering column
 

38, Sorry about the 51 comment, I should have re-read your text. JPL

38 Conv 04-27-2024 03:16 PM

Re: Pictures of a 1952 Ford car automatic steering column
 

[B]]

Thanks sure looks like what is in my truck--I know the steering wheel is a 1953-55 Ford F-100 truck----- Thanks

TJ 04-29-2024 11:47 AM

Re: Pictures of a 1952 Ford car automatic steering column
 

The diecast piece that holds the indicator is usually worn so bad that the shift lever will not stay in park. I don't know of any way to repair the diecast. If this is what you need I could send you a used one that you could play with to see if you could repair the diecast. send me a PM.

tubman 04-29-2024 12:01 PM

Re: Pictures of a 1952 Ford car automatic steering column
 

Quote:

Originally Posted by TJ (Post 2307731)
The diecast piece that holds the indicator is usually worn so bad that the shift lever will not stay in park. I don't know of any way to repair the diecast. If this is what you need I could send you a used one that you could play with to see if you could repair the diecast. send me a PM.

JB Weld, or perhaps some other high-zoot epoxy, such as Belzona or Dev-Con?

rotorwrench 04-29-2024 06:20 PM

Re: Pictures of a 1952 Ford car automatic steering column
 

Have it 3D printed in one of the late type resins.


All times are GMT -5. The time now is 01:54 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.