Congratulation Ronninroadster !! Today at 12:53 Ron ran 207.046 with a Flathead in 1 1/2 mile at the Loring Timing Association.
|
Re: Congratulation Ronninroadster !! impressive to say the least!!
|
Re: Congratulation Ronninroadster !! Well done. That’s years of hard work to achieve such a feat.
|
Re: Congratulation Ronninroadster !! Congratulations Ron ! ! ! !
Paul |
Re: Congratulation Ronninroadster !! Good run!
|
Re: Congratulation Ronninroadster !! Congrats Ron, one heck of a showing
|
Re: Congratulation Ronninroadster !! Wow!!
|
Re: Congratulation Ronninroadster !! Congratulations to you and your crew! Very well done!
|
Re: Congratulation Ronninroadster !! I agree that is a good run. Very well done.
|
Re: Congratulation Ronninroadster !! Totally AMAZING!!! Great job Ron and crew!
|
Re: Congratulation Ronninroadster !! Bully good job Ronnie roadster ,That's what you'ld call "Flat Out Flyin"
|
Re: Congratulation Ronninroadster !! I'd say that'll put the other teams on notice!
|
Re: Congratulation Ronninroadster !! That's impressive. 6 miles an hour over what he does when testing on his front street.....
(Oh, I shouldn't have said that) |
Re: Congratulation Ronninroadster !! Congratulations, very impressive!
Sent from my iPad using Tapatalk |
Re: Congratulation Ronninroadster !! Congrats Ronnie!
|
Re: Congratulation Ronninroadster !! Great work Ronnie
|
Re: Congratulation Ronninroadster !! Congratulations Ronnie, that's movin' on down the track!!
|
Re: Congratulation Ronninroadster !! A mile and a half? That is extremely impressive.
Congratulations. |
Re: Congratulation Ronninroadster !! Awesome ! Congrats..
|
Re: Congratulation Ronninroadster !! Good job Ron.
Wayno |
Re: Congratulation Ronninroadster !! He obviously knows what he’s doing, congratulations.
|
Re: Congratulation Ronninroadster !! Just got back from the trip to Maine. Here's the numbers from the two test runs.
On my first run the mile speed was 190.708 and at the mile and a half the speed was 207.046 For the second run I decided to change the gear in the quickchange to see if the engine which is 292 cubic inches would pull a taller gear. The second run at the mile the speed was 191.438 and at the mile and a half the speed was 208.442. Latter I will post a nice in car video of the 207.046 run so everyone can experience all the excitement. Thanks everyone for the compliments. Ronnieroadster |
Re: Congratulation Ronninroadster !! Ronnie, Your previous record was on gasoline...what fuel were you running on these runs?
|
Re: Congratulation Ronninroadster !! Quote:
|
Re: Congratulation Ronninroadster !! Wow! Very well done Ron!!
|
Re: Congratulation Ronninroadster !! |
Re: Congratulation Ronninroadster !! Yep, that's got some boogie, thanks for the ride!!
|
Re: Congratulation Ronninroadster !! Quote:
As usual....SPECTACULAR! I saw 64-6500 going through the traps, and saw 135-ish on the oil pressure on occasion. Unreal, what YOU guys are doing, Ron! DD |
Re: Congratulation Ronninroadster !! Great RUN!! ......It will be fun to see you at the salt soon!!
|
Re: Congratulation Ronninroadster !! Dang! That is impressive.
|
Re: Congratulation Ronninroadster !! Happy for you Thanks for the video.
|
Re: Congratulation Ronninroadster !! That just plain MADE my night. Amazing!
|
Re: Congratulation Ronninroadster !! Wow, that was fun! Impressive RPMs.
Glenn |
Re: Congratulation Ronninroadster !! She’s a goer Bub!!!!........Mark
|
Re: Congratulation Ronninroadster !! CONGRATULATIONS Ronnie. Also, thanks for the ARDUN education video I just watched on HAMB.
https://www.jalopyjournal.com/forum/...-work.1235807/ |
Re: Congratulation Ronninroadster !! 1 Attachment(s)
Yessss....
|
Re: Congratulation Ronninroadster !! Quote:
..... |
Re: Congratulation Ronninroadster !! Quote:
With enthusiasm worthy of the accomplishment! DD https://media1.tenor.com/images/c60d...temid=13347383 |
Re: Congratulation Ronninroadster !! It is the most fun you can have with your clothes on.
|
Re: Congratulation Ronninroadster !! Outstanding Ron, kudos to you, Jnr and Laura on this achievement !!
|
All times are GMT -5. The time now is 08:02 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.