rear brake drum puller
 

what is the best rear brake drum puller??. I had one that i lent out but never got it back. I only used it once, it was in a nice wooden box cant remember the brand name, would like to get another one, thanks stan white.

Re: rear brake drum puller
 

KR Wilson ! Hands down

Re: rear brake drum puller
 

Vintage precision, hands down!!! THE best V8 Ford specific tool I have ever bought!! NO offense to Ken/alabama above. The K R Wilson is good too!!! IMO. The vintage precision is better!! *****NOTE****** “IMO”!!!

Re: rear brake drum puller
 

I have not used the KR Wilson tool, but also highly recommend the Vintage Precision tool. Works every time

Re: rear brake drum puller
 

Stan , this is the one that came in the wood box. Sadly, it's no longer being made. However, the pullers mentioned above work just fine.

Re: rear brake drum puller
 

Nobody has mentioned that the two pullers referred to are basically of the same design, both being repops of the original KRW puller. There is no other puller of any design that is worth a poop on these Ford hubs.

Re: rear brake drum puller
 

I ordered the Vintage Precision puller. I was truly amazed at the high quality of this tool. When was the last time you unpackaged a new purchase and it far exceded your expectations? Worked as good as it looked. They really should make a king pin removal tool based on the old KR Wilson type.

Re: rear brake drum puller
 

https://www.fordbarn.com/forum/attac...6&d=1669861943


https://www.fordbarn.com/forum/attac...7&d=1669861943

Re: rear brake drum puller
 

Vintage Precision > https://vintageprecision.com/product...ers/index.html


https://external-content.duckduckgo....b12&ipo=images



https://external-content.duckduckgo....223&ipo=images

Re: rear brake drum puller
 

Here's the one you're talking about, and the one that I chose. They show-up on eBay with some regularity.

Coop


https://www.fordbarn.com/forum/attac...2&d=1332184432


https://www.fordbarn.com/forum/attac...3&d=1332184432


https://www.fordbarn.com/forum/attac...0&d=1332184432

Re: rear brake drum puller
 

Except when the key catches the drum, wrong edge up. Happened to a RG # 85 member. Newc

Re: rear brake drum puller
 

I’ll have to look into that. Didn’t know that existed. Something new every day!

Re: rear brake drum puller
 

petehoovie: Thanks for enlarging the puller photo.

Re: rear brake drum puller
 

I have 3 Winfield tool works KR. Wilson pullers all barely used. I would sell one. Do not have wooobox. That was an option.

Re: rear brake drum puller
 

I would be interested in one , No i do not have the box . If you are interested in selling one give me a call. Thanks Stan 775 364 4367 Northern Nevada

Re: rear brake drum puller
 

Re: rear brake drum puller
 

I always say if a hub comes off with a puller other than the ones mentioned, it wasn't tight enough!

Re: rear brake drum puller
 

One that I built, works great!

Re: rear brake drum puller
 

TO Marts point
AND can of "worms" now open......ANYONE with the vintage precision puller notice in the directions 125ft Lbs of torque is the MAX suggested for pulling a hub......AND Isn't 200ft Lbs the recommended torque for the installation of the drum???? Quite the difference


Kube & 38FordV8 Tomato Tomotto Right?? Only difference is Vintage Precision is basicaly "On Demand". K R Wilson most likely NOT so much!!!

Re: rear brake drum puller
 

I didn't notice the VP instructions stated 125 ft lbs. I'm normally fearing for my mortal life when winding it up! I'm glad there is a nut on there or the hub might take the wall out!

Nice job Wat-0!