1941-48 Ford handbrake equalizer clevis rubber washer 11A-2091 1 Attachment(s)
Just wondering if someone can tell me where this fits in on the handbrake equalizer mechanism?
The parts book only give a very vague indication as the basic location and I cannot tell exactly where it fits. At least it is not obvious to me :) |
Re: 1941-48 Ford handbrake equalizer clevis rubber washer 11A-2091 I had one on my '41 but don't remember exactly where it goes. I googled '41-48 e-brakes
and everyone lists the rubber but one one says exactly where it goes. good luck |
Re: 1941-48 Ford handbrake equalizer clevis rubber washer 11A-2091 I had the same issue - have/had one but never could tell where it went.
Sorry |
Re: 1941-48 Ford handbrake equalizer clevis rubber washer 11A-2091 on the adjustment link at the torque tube
|
Re: 1941-48 Ford handbrake equalizer clevis rubber washer 11A-2091 Quote:
|
Re: 1941-48 Ford handbrake equalizer clevis rubber washer 11A-2091 I know we like to say around here that Henry wouldn't have put it on there if it didn't need it, but I've never had one and somehow my handbrakes still work...
|
Re: 1941-48 Ford handbrake equalizer clevis rubber washer 11A-2091 1 Attachment(s)
This rubber thingy is shown on page 24 of the parts green book, and listed as P/N 11A-2091-A, Washer (hand brake equalizer clevis) - rubber. It goes on the brake cable before the adjusting clevis is screwed on. According to the '39 - 48 service manual, it look like it fits over the turn buckle, adjusted to the vertical position, and possibly acts a a bumper to stop the equalizer assembly from hitting the floor pan when the cable is slack and driving on a bumpy road? That is my best idea of its purpose, and I don't have one on my '46 Coupe either.
|
Re: 1941-48 Ford handbrake equalizer clevis rubber washer 11A-2091 Quote:
|
All times are GMT -5. The time now is 07:20 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.