The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   brackets measurements (https://www.fordbarn.com/forum/showthread.php?t=31115)

'29wagon 03-10-2011 09:04 PM

brackets measurements
 

i'm about to make a couple of brackets (rear-hood to frame and cowl to frame).

The vertical side to meet the frame is a give-in but if anyone can help .
I'm looking for the distance from the frame to the bolt hole center on the top flanges only. thanks if you can help out .


All times are GMT -5. The time now is 06:42 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.