The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   1930 Tudor header board size? (https://www.fordbarn.com/forum/showthread.php?t=128752)

karasmer 01-15-2014 12:43 PM

1930 Tudor header board size?
 

Does anybody have a front header board (above windshield) that is loose or exposed and could give me the length, width, and thickness of it? I am trying to determine if I have the correct one and make sure I get the correct one if not. Thanks

Terry,NJ 01-15-2014 05:49 PM

Re: 1930 Tudor header board size?
 

First off, Headers are not made from a single piece of wood. They are a conglomeration of about 3 or 4 pieces. I don't advise you to make your own if you don't have a pattern. That being said, I measured my semi-installed one in my Town Sedan. These figures are rough (Semi installed) Although the height is pretty near correct at 3 inches. The width is 47 inches. The front is an angle starting at 3 1/2" at the top and about 2 inches at the bottom. The most favored wood is Ash. Good luck!
Terry

karasmer 01-15-2014 08:26 PM

Re: 1930 Tudor header board size?
 

Thanks Terry, the one I have has to be out of something else.


All times are GMT -5. The time now is 05:00 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.