Speed bleeders for 1949 F1 just getting ready to bleed my brake lines, I would appreciate any input for using Speed Bleeder for this project.
Or other alternatives would be helpful. First time doing this process...... 1949 Ford F1 |
Re: Speed bleeders for 1949 F1 The only "speed bleeder" I am familiar with are 'Speed bleeders' which replace the (4) bleeders with a new design bleeder that allows one person to bleed the brakes using the pedal.
They work great. |
Re: Speed bleeders for 1949 F1 If you have replaced your wheel cylinders, check the bleeder screw threads carefully. Mine are metric. :-(
|
Re: Speed bleeders for 1949 F1 I installed the speed bleeders on my 39 Coupe. They work great. I purchased mine direct from Speed Bleeders.
|
Re: Speed bleeders for 1949 F1 I have them on my 48. They’re the only way to go in my opinion. Makes bleeding brakes literally painless and quick. Not to mention a one person job.
|
Re: Speed bleeders for 1949 F1 Looking to purchase a set. Can a part No be supplied or the specs ie 3/8" x 24 x 1/1/2"?
Thanks Phil NZ |
Re: Speed bleeders for 1949 F1 No PN , but repco and super cheap sell the one man bleeder kit .As i imagine do Napa and autozone and O’Reilly’s Works like a charm . Mechpro one man bleeder kit. No need to change the wheel cylinder bleeders ,i dont profess to know the “speed bleeders”. Mechpro is Kinda like a hollow golf tee and a bottle with a magnet . never had it fail on my own ,over numerous cars bled .
|
Re: Speed bleeders for 1949 F1 Another vote for "Speed Bleeders".
|
Re: Speed bleeders for 1949 F1 jtminor: This thread will answer your questions.
https://www.fordbarn.com/forum/showt...speed+bleeders |
Re: Speed bleeders for 1949 F1 They work great on my 53' Merc. Makes me wish I had done it years ago.
|
Re: Speed bleeders for 1949 F1 Started to bleed brakes today, two guys method. Back brakes worked fine, no luck on the front. Front brakes only - new brake cylinders and shoes, re-surfaced drums. Nothing but air coming out of front when we tried to bleed.... what did I do wrong or what's happening, you guys will know..... Thanks
|
Re: Speed bleeders for 1949 F1 Check fluid in master cylinder, could be drawing air if fluid is to low. Also check all your
connections for loose screws or flare nuts, and faulty flex hose. |
Re: Speed bleeders for 1949 F1 1 Attachment(s)
Having trouble determining how to fill MC I removed the top nut, do you have to remove the square nut also ?
|
Re: Speed bleeders for 1949 F1 Quote:
Phil NZ |
Re: Speed bleeders for 1949 F1 Do you remove square nut from under the truck....?
|
Re: Speed bleeders for 1949 F1 And you need to start over on the brake bleeding as there will be air in the lines. No way you can possibly bleed brakes without constantly checking the MC fluid level.
|
Re: Speed bleeders for 1949 F1 any clue how to remove the square nut....? having trouble getting at it....thanks
|
Re: Speed bleeders for 1949 F1 Any suggestion how to remove the square nut, I'm having trouble getting at it....
|
Re: Speed bleeders for 1949 F1 Quote:
|
Re: Speed bleeders for 1949 F1 Thanks , I will fill via that opening.....
|
All times are GMT -5. The time now is 05:57 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.