Another "What's It Worth" Thread
 

'32 B Pick-Up.

And, before I ask the question: "What's It Worth" please allow me to give you some information on this pick-up.

It has been in covered storage prior to and since 1971. The original 4 cylinder engine is long gone and is replaced by a 1937, 60/V-8. Engine has been rebuilt with all NOS parts and was done so about 20 or more years ago and never ran (have lots of NOS parts, spare distributor, etc). The engine has always been stored in a climate controlled garage space. Radiator is going to need work as it has been reworked to cool that '37 V-8.

All the sheet metal is in good condition. Door bottoms are solid, running boards are solid, PU bed is solid as is the tail gate (IIRC). Front fenders are in good shape with a little tearing where the head lamp assembly attaches and I think there are some tears where the front fender support attached to the lip of th e fender. Rear fenders both have had work done to them and also have some tears in them. The only spot where there is swiss cheese is on the cab just behind the gas tank and as I recall, about the size of a dollar bill. BTW, gas tank looks to be in solid condition as well. Grill shell is in nice shape but there is evidence of repair to several of the fins of which all are present. Engine cowl is in great shape as well.

Glass all "appears" to be period correct and the rear window has a small crack and all the hardware for the front windshield is there. Steering wheel is in fair shape and all original gauges are still in the dash. Original floor boards are long gone.

As for the frame, there is some reinforcement above the rear axle on one side (passenger) but the remainder of the frame appears to be fine. All mechanical brake parts are there and the wheel drums look to be serviceable. Of course, the shocks are toast but at least, are with the truck. Transmission, torque tube, and rear axle are all intact and as I recall, the transmission shifting was good but there was some clutch chatter as I drove the local roads in Tacoma, WA till the brakes took a couple of years off my tender age at that time of 20.

Front bumper is in okay shape and has one crack where it attaches to the bumper frame (passenger side). The rear bumpers are "MIA" if they ever existed. The single tail light is in good condition with what "appears" to be the original lens and frame.

What other information will you fellows require to assess the value of this rig? Happy to give further descriptions or detailed pictures.

My FIL bought this truck from a guy in Gig Harbor, WA in '71. He sold it to me in 1973 or there about. As mentioned above, it ran at that time, but today, it has been disassemble somewhat and could easily be returned to a roller. Have 5 wire wheels with the hub caps along with 5 "new" tires and tubes. Note the tires were bought over 20 years ago and never installed.........

Appreciate your help in assessing the value of this truck. Please add some dollars for the sentimentality factor too.

Thanks for reading and looking at the pictures.

Best,

Test.

http://i45.tinypic.com/2nvzfgw.jpg

http://i49.tinypic.com/ohji9.jpg

http://i48.tinypic.com/2ajvucg.jpg

http://i48.tinypic.com/28k5yyb.jpg

http://i49.tinypic.com/2ebztib.jpg

http://i49.tinypic.com/2k3as2.jpg

Re: Another "What's It Worth" Thread
 

I dunno but I'd love to get that back to Chez Mart.

Re: Another "What's It Worth" Thread
 

Test Osterone.....I picked mine up in similar condition as yours for 10K (it was a running, good condition Model A Tudor trade valued at that amount).
Your box looks like it has been shortened?

Re: Another "What's It Worth" Thread
 

Sorry to say it is worth more to a butcher rodder than an original Ford person. The bed would cost somewhere in the neighborhood of 3K plus to replace. There are a lot of good parts there and good sheet metal but a lot of work to make a restored PU. As a driver with the 60 it would be a lot more desirable like it is cleaned up with brake floaters new wiring, shocks and necessary items to make it safe and roadworthy.

Re: Another "What's It Worth" Thread
 

Does the weather vain go with it?

Just kidding, do you have the seats or seat frames for it. Shorten bed or not it could be a nice runner when put back together, with that said I think 10K might be on the strong side in todays economy and the amount of work required to bring it back.

With the 60HP engine and some updates it could be a real nice mild traditional hot rod, guess I'm that "butcher rodder", but if you're selling it what do you care, right. Just my .02¢.

Re: Another "What's It Worth" Thread
 

Man, that truck is sweeeeet! I wish mine were in such good condition when I got it.I think if you put it back to a roller it would bring 10-15 k in the market. I know if you put it back together and got it running it would bring at least that. A lot depends upon where you sell it. People will pay more in some areas of the country than others. Check "completed listings" on ebay to see what similar trucks got bit up to.
Man, I'd love that one. You might regret selling it.

Re: Another "What's It Worth" Thread
 

Thanks for stopping by, Mart.

Spent some time on your long thread and enjoyed the documentation you have completed. Suspect that I will be spending more time reading about your efforts to get the car back on the road. A fun read!


Thanks for your contribution, 2935ford.

Not a clue about the box being shortened. Would you have the OE dimensions for the box? Also, if the box was altered, that would mean the frame was altered as well? Will be back at the storage location this week and will take a closer look.

Hi there, jimTN.

I've looked at the "rat rod" (butcher rodder?) builds and many are very well done, which leaves some others that were, well, can we just agree that we all have different ideas of cool? Have never seen a nicely restored '32 Pickup. Of course, have seen them with 283/327 engines, etc. If the car does stay in my collection, pretty sure it will be of "driver" status perhaps with a local utility service truck theme.

Thanks for your time and effort to post, done4.

That weather vane came off the horse barn where my wife grew up and her father made it. So, that would be a point to discuss down the road.

Yes, the seat frames are in reasonable condition. A bench platform for the bottom and individual seat backs (or, maybe I have that backwards, it's been a long time since I spent any time on this project.) I overlooked that in my original description. I also overlooked talking about the head light buckets and the OE head light lens are all in great shape.

Will need to spend some time at your thread to see what you have created from the original Ford iron.

34pickup, appreciate what you have to say.

I've contemplated getting this rig back on the road for many, many years. A project that was (maybe still is) being saved for my retirement years. So, this one always seems to take a back seat to the other projects on hand. Wife has suggested that I sell the pickup because she can never see herself riding in it. Who said I would even offer a ride in it........ And, I will never suggest that she thins out the shoe collection or the racks and racks of cloths that are never in style any longer even if they are just a few months old, at least it seems this way to me, but hey, what do I know?

Thanks for your suggestions and your comments. I've had this truck for a long time and think it may be a part of my DNA today, or maybe not.

Thank you all for taking the time to post and sharing your knowledge with me.

Best,

Test.

Re: Another "What's It Worth" Thread
 

The original bed was 69 3/32" long and it hangs over the end of the frame to a very considerable extent so it is highly unlikely that the frame has been modified as a result of the bed having been shortened. Also, the tail gate on the bed is a '35-'36 version. The '32-'34 version was plain (no Ford script).

Re: Another "What's It Worth" Thread
 

Re: Another "What's It Worth" Thread
 

Test O - not knowing what your exact plans are, and thinking you may be thinking about keeping it, many would give their eye teeth to have something that looks as clean as this. Restore it, build a driver, or an old school hot rod it doesn't matter - it's a 32 Ford p-up. Your pocketbook (or someone else's) will decide which way it will go.

However, if it were mine the V8-60 would go in it, put some rear gears in it so it's not screaming @ 50 mph and drive it as is. Not everything has to be all shiny and pretty - sometimes you just want a driver where you don't have to worry about it so much and you can enjoy it that much more. You've got some personal history with this vehicle as well, all the more reason to get it back on the road and as a simple every-day driver, that's the fastest way to do that. It's a great little truck to go get your Christmas tree with, don't cha think?! Once on the road, you can then decide whether to sell or keep.

To me, a restoration would take the most money and time (probably $20K invested for maybe a $25K return), an old school hot rod would be the next expensive and somnewhat less time depending on your build plans (probably $8-12K for around a $15K return), building it as a driver the cheapest and fastest "build" time ($5-6K with a $10-12K return), and selling it as is, depending on the area of the country it's going to, between $4-8K

Go lurk over on the Jalopyjournal and see what some guys have done, what they've sold, adn for what prices. Alot of talent there, loads of great ideas if you are not a die hard restorer, but I bet many, many of them would do just what I said above and have miles of smiles after doing it.

Sorry if I have offended anyone but some vehicles "tell" their owners which way to go, if they just take the time to listen ....

Re: Another "What's It Worth" Thread
 

What would it bring? The answer in not to be found in dollars and cents. By your recollection you bought it almost 40 years ago from your F-I-L, that to me is worth something right there. I was close to my F-I-L but he was into Buicks, as in late model and rides like a cloud. I don't think he ever understood my attraction to '32 Fords.
I'm thinking you should put it back together with a modest budget and enjoy the memory of where it came from. For sure it looks like a great start for a fun driver.
I don't think that will burden you with the unfortunate moniker of "butcher rodder", it just shows you are someone who finds value in the past; be it a relationship or just some old car. Oh, and for every butcher rodder there is a hack restorer out there too.

Re: Another "What's It Worth" Thread
 

Thank you, DavidG.

Good to know and personally, like the looks of the short box. Can it be determined what year the box might be from? The bed is ribbed metal. Perhaps a more detailed picture would be best.

Thank you, Roger/Sacramento.

I am pretty sure that this would be a lower budget project if I elect to keep it in the collection. Doing a '63 356 Cab and have lots invested here, and with market prices the way they are today for the 356 Porsches, have a long way to go before spending trumps value. Not the same for the '32 B project.


Hi TomT and thanks for posting your thoughts. Not sure if I will ever know my "exact plans" for any one project I have on the front or the back burners. You are right that this truck has lots of potential and it might be a good one to haul the golf clubs in or to haul the bikes to the local riding trail. Many directions the project can take.

Fordors, you hit the nail on the head. A ton of value here because of my FIL. A great fellow and a trusted mentor to me during my formative early adult life. Still, need to accurately asses the value of the rig to ensure what should be done; sell or keep.

No truer words spoken on the hack restorer.......

Again, my thanks to all of you that have taken the time to post your thoughts to this growing thread.

Best,

Test.

Re: Another "What's It Worth" Thread
 

I have to agree with Roger.
Here in California (northern, at least), trucks just don't sell for big money at all. My neighbor has a great 32 pickup body and frame, along with most of the parts to make it a complete truck. He couldn't get anyone to pay $5K.

Re: Another "What's It Worth" Thread
 

Awesome truck. For some reason the trucks dont catch the big dollar here either, but I like em and will continue getting them back on the road.

Re: Another "What's It Worth" Thread
 

The V-8 60 cars usually had a 4.44 ratio R E & even then they would bog down on the hills.The B engine,while only rated at 50 HP has much more torque than the 60 and will out perform it on the hills even with 3.78 or 3.54 gears.

Re: Another "What's It Worth" Thread
 

Keep it as close to what you have and get it on the road. I bought my '33 V8 in 2004 for $10K and although it was all there, I spent another $9 to redo all the front end, fuel system and brakes including some minor body work to the wheel well fender where it had rotted away. Get a seat and rear cushion set from LeBaron Bonney and you are done........DRIVE IT!!! The pick-ups from 32-33-34 are rare to see in original condition and worth as much or more than most Model "A"s I get more compliments on my pickup than my '28 Phaeton.

Re: Another "What's It Worth" Thread
 

As you're probably aware, opinions on value are just that, opinions. Without the test of actually reaching for the wallet and pealing off the Benjamins, the numbers can be optimistic at times. In support of those who've opined at something under 10k as it sits, here are a couple of recent actual sales for fully assembled, running rigs........one a decent regional indicator in Royal City.

What you've got looks good in the pics and certainly has value, I hope you can figure out a positive choice for it's future.

http://cgi.ebay.com/ebaymotors/Ford-...item3a79217841

http://cgi.ebay.com/ebaymotors/Ford-...item43b42b74aa

Re: Another "What's It Worth" Thread
 

Thank you, Kahuna.

If I let mine go for $5K, think there would be a hole in my heart.

Thanks for the comments, 47 flatbed.

Good to read you are committed to keeping the history alive for these fine old trucks.

Appreciate the technical information, columbiA.

I've wondered about the gears in this rig and figured that the '37 V-8 for something less than a "torque monster" and there is no surprise the 4 banger has more torque. Since there is a V-8 for it, that will go in the truck. Maybe headers would help......:D

Great advice, al's28/33.

Fix it up, and drive it. What's the word on mechanical brakes? Do the work and make sure all the components are top notch, or go to juice? Would agree that a stock appearing '32 pickup is far more appreciated than the rodded version.

Thanks for stopping by Uncle Bob and fellow PacNoWester.

Opinions and belly buttons, we all have them and I'm thankful we can express our opinions freely. This old truck is in pretty good shape, for what it is, and I'm certain, it will have a good home in my collection or at some other home. It is just a matter of time and interest.

Thanks for the links too. These bring some reality to the quest of assessing the relative value of this '32. Think that I will continue on a bit more in searching out what others have say about value and desirability.

Thanks to all of you for your time and for all of the information and interest in helping me gather the facts on this old truck.

Best,

Test.

Re: Another "What's It Worth" Thread
 

Clean it up, get it running and drive it. I bought a 41 pickup with old lacquer paint and some chrome Merc wheels and have more fun driving it than any other old Ford that I have owned. I was amazed at the number of people who just love this old truck and stop to comment on it. Just get it running and have fun. You already own it, so whatever you spend on it to get it roadworthy will not be wasted.

Re: Another "What's It Worth" Thread
 

i think the bed is a model A tail gate is not model A A beds are a lot shorter than 32 i have both

Re: Another "What's It Worth" Thread
 

TJ,

Thank you for taking the time to post. Seems to be the consensus on fixing the truck up and put back on the road. So, back to the mechanical brakes: Change to juice or get the OE working?

I think you have a good eye, ora master. I'll take some better shots of the bed today and post them.

Thanks for contributing to my thread.

Best,

Test.

Re: Another "What's It Worth" Thread
 

More pictures of the box on the '32. Looks like to my untrained eye that the box has been shortened due to the gas filler neck being removed and other "tack welds" here and there. Then, I suppose the box might be from a different year since the gas tank in this truck lives under the seat and the passenger side bottom is removed to access the gas cap. Another anomaly on this truck?

Anyway, appreciate your comments on this little truck.

http://i45.tinypic.com/2cqgwna.jpg

http://i48.tinypic.com/166j77c.jpg

http://i50.tinypic.com/11alwyr.jpg

http://i46.tinypic.com/2iitz13.jpg

Thanks for reading and looking at the pictures.

Best,

Test.

Re: Another "What's It Worth" Thread
 

I'd part it out it would bring over $12,000.I got over 12 out of a 4 dr body and iriginal frame.

Re: Another "What's It Worth" Thread
 

test your truck is NOT a32 either 33 or 34 after comeing back and looking at the fire wall pictures fire wall on 32 is not fastened to the body please correct me if i am wrong thanks ora

Re: Another "What's It Worth" Thread
 

I'm amazed about all the comments that trucks just don't go for much in their area. In So Calif they are going for more than everything but roadsters and convertibles. Especially after they are done.

Re: Another "What's It Worth" Thread
 

You are defiantly wrong,,it's a 1932 Ford & yeah some one has shortened the bed.

As for the firewall,,all 32 fords have separate firewalls.

BTW,I'm one of those butcher rodders!:D HRP

Re: Another "What's It Worth" Thread
 

I think it is a 33, definitley not 34 as 34 had extra rib around cab as pictured here.
Gary.

Re: Another "What's It Worth" Thread
 

The firewall is 32. Definitely.
The frame rails are 1932. Note the swage line?

Why would anyone say it is not a 32?

I still love it by the way.

Mart.

Re: Another "What's It Worth" Thread
 

hoyrodder you are wright and wrong like i said 32 firewalls are not part of cab go back and look at firewall picture this truck is not 32

Re: Another "What's It Worth" Thread
 

mart sorry truck cab is not 32 rails look like 32 bed looks like model A i would say it is not 32 because i have one i restored have a nice day ora

Re: Another "What's It Worth" Thread
 

Purely for the purposes of education, not argument, but for me it's saying 32 (I'm just talking cab, firewall, frame). The firewall looks just like my 32 firewall, the cab has the clamp down tabs at the base of the cowl to pull it down over the non-attached 32 style firewall.

What am I missing or reading wrong?

Respectfully,

Mart.

Re: Another "What's It Worth" Thread
 

>what's the word on mechanical brakes?

IMO mechanical brakes are FINE for the kind of driving you are likely to be doing with this truck.

Sometime I get the impression from guys who are going to hydraulic brakes it's a little bit of an ego trip - like "well I'm gonna drive this thing hard enough so I'll need juice brake to stop it".

The reality is more like 45-50 mph and mechanicals which are in good shape are perfectly capable and safe at those speeds.

A neat thing about mechanical brakes is that it's easy to get them working well. Lubricating all the linkages, straightening the brake rods, rebuilding the cross shaft if it needs it are all relatively inexpensive tasks. If you chase down all the slop in the linkages and eliminate it, then perform a full brake adjustment per the Ford Service Bulletins, the brakes will be more than adequate for any reasonable use. (AND you never have to worry about the dreaded 'squish')

I'm just sayin'