Need ‘35 horn parts
 

Does anyone sell new internals for ‘35 Ford horns?
My external bezel & mounting pieces are beautiful but internal actual horns don’t work. Looks like someone’s been inside & while externally theyre correct internally has a different insides in each? I’d like to find correct new or rebuilt internals for both!

Re: Need ‘35 horn parts
 

you should be able to use the internals from 34 and 36 horns

Re: Need ‘35 horn parts
 

I have several horns from 1935 commercial and trucks. There must have been two different manufacturers as there are two distinctly different internal configurations. Maybe Ford changed the specifications along the way and one is an early style and the other a later style? I'm inclined to believe it's two different suppliers.

One style is complex and includes a capacitor. The other is much simpler in design. The simpler design is attached with bolts while the more complex design uses threaded holes and screws as the attachment method. Maybe someone with more knowledge can add some identification details.

Also, I've heard that the reproduction horns don't work well.

Re: Need ‘35 horn parts
 

https://www.fordbarn.com/forum/attac...1&d=1763317147

https://www.fordbarn.com/forum/attac...2&d=1763317197

Re: Need ‘35 horn parts
 

There is a guy in West Bend Wisconsin "The Horn Guy" that has reconditioned horns. His name is Gary Wise phone # (262) 339-0507 he maybe can answer your questions, or he may have the parts you need.

Re: Need ‘35 horn parts
 

Dec211975 - Thanks for the lead. I'll give Gary a call.

Re: Need ‘35 horn parts
 

Thx but truck r bigger & wont fit car bezel.

Re: Need ‘35 horn parts
 

Thx, I’ll check him out!

Re: Need ‘35 horn parts
 

1935 cars (Model 48), commercial (Model 50) and truck (Model 51) all used the same horn assembly. The only difference is the mounting bracket.

Re: Need ‘35 horn parts
 

Turns out the images in Post #4 are the Schwarze design on top and the Spartan design on the bottom. The Schwarze design came into production in April 1935 while the Spartan design started with the beginning of 1935 production and went all the way to the end of 1936 production for vehicles with horns mounted on the fender.
Here's a better picture of a Schwarze designed horn.

Re: Need ‘35 horn parts
 

Re: Need ‘35 horn parts
 

Were you able to make contact with Gary? It has been several years since I got a business card from him at a swap meet, was not sure if he was still working on horns.

Regards,
Brian

Re: Need ‘35 horn parts
 

The top photo in post #4 above appears like the Sparton car horns CL-4 and CL-6

Re: Need ‘35 horn parts
 

I just converted to 12V with Harbor Freight guts at about $15 each. Newc

Re: Need ‘35 horn parts
 

2x on the 12 volt guts works great, mine came from the junk yard

Re: Need ‘35 horn parts
 

Newc. Please elaborate? Harbor freight has 12v 35 Ford horn conversion guts?

Re: Need ‘35 horn parts
 

Sounds like a "how to tech" post on Harbor Freight or junkyard horn conversions would be of interest.

Re: Need ‘35 horn parts
 

Brian, not yet. I will when I understand what I have inside my bezels. Each is different! Probly one of each mentioned in post Schrwarze & spartan. Probably would like both the same when I replace guts!

Re: Need ‘35 horn parts
 

I got a pair of horns from a early 90s Lincoln, took them apart and put the horn parts in the 35 shells. took some engineering but thats the fun, right

Re: Need ‘35 horn parts
 

I hate incomplete or wrong information especially when it appears authoritative. I'm guilt of doing such a thing in Post 10. I didn't do my homework well enough. I've taken the time to review every scrap of information I have on horn motors and put it into the attached document. There are three types of horn motors for 1935 Fords. There are two Spartan designs - 40-13815 and B-13815-B which were in use for the entire model year. In about April 1935 Ford added a Schwarze design 48-13815. My apologies for any confusion.

Re: Need ‘35 horn parts
 

I rebuilt my 33 horn by retrofitting the internals out of new 12v bull horn, some modification required to the mechanical operation. The perimeter mounting holes exactly line up and the cover will fit.
https://www.ebay.com.au/itm/36137884...3ABFBM-tzJyNZm

Re: Need ‘35 horn parts
 

Model 51.. thanks for all your hard work to clarify this topic. I have the B 13815 spartan and it is a major PITA to adjust and set. The others look a lot simpler.. can you offer any comments in comparisons, do the others actually work better? Also, another post suggested any "replacement" can be made using same parts from 33-36. Can you confirm this?

Thanks

Re: Need ‘35 horn parts
 

I'm frustrated that I can't get any one of my horns to work. It looks like such a simple device with so few parts but I must be missing something or overlooking things. I put this project aside for a bit but will have to get back on it soon. I've done a little search trying to find someone to help with no success so I'm a bit frustrated, hence my decision to work on other more pressing restoration projects for now.

I don't have any idea about replacement parts. I've heard that the reproduction horns aren't very good but I don't have any experience with those either.