Ammco brake shoe chart I am looking for Ammco 4181 chart that lists the proper gage plate and sleeve when arcing shoes with fixed anchors. Used on the 890 grinder with the
8250 fixed anchor shoe clamp. I would like to buy a copy if possible. I can not seem to find any info on this chart. Thanks,, Don |
Re: Ammco brake shoe chart Can't help you, Don, but I remember that chart well & it's a MUST to have!
Hopefully someone can at least post a COPY & you might be able to enlarge it. Bill W. |
Re: Ammco brake shoe chart I would also like a copy as I own the same machine.
|
Re: Ammco brake shoe chart [QUOTE=Fullraceflathead;1270339]I would also like a copy as I own the same machine.[/QUOT
Yea I would also like several copies..... |
Re: Ammco brake shoe chart Thanks for the replies A -Men---If I ever find one I will surely let you all in on a copy somehow--There has to be a few out there somewhere!! Don
|
Re: Ammco brake shoe chart I have the 4181 chart. I wanted to get the gage adapter to do some Lincoln 12 inch shoes which used a fixed anchor. Tried Ammco and all parts for the shoe arcing machines was scrapped when the asbestos dust issue opened up. The chart is about 20 inches tall two sided. Ihave the charts for both the 4140 and 8250 clamps. Send me your email or PM me and I will scan and send to you in an email. NO charge of course.
|
Re: Ammco brake shoe chart Quote:
[email protected] [email protected] |
Re: Ammco brake shoe chart Quote:
YOU'RE A GREAT DUDE, TO DO THIS:) Bill W. |
Re: Ammco brake shoe chart KR 500: thank you very much. [email protected]
|
Re: Ammco brake shoe chart Quote:
THANKS DAN !!!!!!!!!!!!!!!!!!!!! |
Re: Ammco brake shoe chart Hello, I would also like a chart please. Our local Model A club has a machine we are trying to get running.
My email is [email protected] Thanks! David |
Re: Ammco brake shoe chart Quote:
Thank You Phil |
Re: Ammco brake shoe chart Quote:
|
Re: Ammco brake shoe chart I’d like a copy of the fore mentioned chart if anyone would be so kind. Also a place to buy parts or the gauge plate and anchor sleeve.
Thx John [email protected] |
Re: Ammco brake shoe chart BornJohn, Welcome and ebay is the only place I a have seen parts. There is a gauge plate in the parts for sale section here though.
Mike |
Re: Ammco brake shoe chart Quote:
Thanks guys! |
Re: Ammco brake shoe chart I would be interested in a copy. tia, Jim
Jmason @ chartermi dot net |
Re: Ammco brake shoe chart Please add me to your list [email protected] Thanks, Steve
|
Re: Ammco brake shoe chart thank you KR500 !!!
[email protected] |
Re: Ammco brake shoe chart I too would like a copy of the Ammco 8250 chart. I have an Ammco 9250 machine .Grant
Email [email protected] |
Re: Ammco brake shoe chart Can anyone share a copy of this chart? Thank you Ron
[email protected] |
Re: Ammco brake shoe chart |
Re: Ammco brake shoe chart While he has been on line in the V8 section today, this one is from 2016-17 so you might send a PM or email to get his attention because he may not be looking in the Model A section.
|
Re: Ammco brake shoe chart Has anyone heard from kr500? I posted on the forum, sent a PM, and also sent an email and haven't seen a response yet.
|
Re: Ammco brake shoe chart Deleted because he has seen this.
|
Re: Ammco brake shoe chart I have sent about a dozen emails out to those requesting the Ammco brake shoe arcer charts. If you don't receive a copy PM me and I will accommodate your request.
|
Re: Ammco brake shoe chart Quote:
|
Re: Ammco brake shoe chart I'm also in need of the ammco 4181 chart. Does any one have one? Also I could use some more of the gauge plates and anchor sleeves. Does any one have any to sell?
|
Re: Ammco brake shoe chart Pease put me on the list. Thank you EBTHIB@MSN. COM
|
Re: Ammco brake shoe chart My email is [email protected]
|
Re: Ammco brake shoe chart I realize this is an old thread.I came across it yesterday in my search. I have an Ammco 890 arc grinder with a 8250 fixed anchor shoe clamp.
I’m searching for the gauge plates and sleeves. If anyone has a set you’d part with or perhaps trace the plates and measure the sleeves so I could have some made I’d sure appreciate it. I’ve been searching for a while and it seems I might as well be looking for dinosaurs. I too would appreciate a copy of the chart just in case I find the plates and sleeves. [email protected]. Thanks |
Re: Ammco brake shoe chart Quote:
|
Re: Ammco brake shoe chart Yes those are them thanks.
Do you know where I can buy a set? |
Re: Ammco brake shoe chart Quote:
|
Re: Ammco brake shoe chart 1 Attachment(s)
Here's the manual
|
Re: Ammco brake shoe chart Quote:
Hi, I hope this message finds you well. I know this is an older post, but since I'm a new member I am not yet allowed to send private messages. I see you've been able to provide Ammco reference chart #4181 to other users on this forum, and I was hoping you could do the same for me. I just purchased a Model 890 Brake Shoe Arc Grinder with the #8250 brake shoe clamp, and have most everything I need for it except the reference chart. My email is [email protected] if you'd prefer to contact me there. Any help would be greatly appreciated! Many thanks, -Phil |
Re: Ammco brake shoe chart Anyone on here who got a copy of the #4181 chart that would like to share? Need one for my machine.
Many thanks! -Phil |
Re: Ammco brake shoe chart KR500,
I have recently inherited an 890 Saf-Arc with 8250 clamp and shims, but need the gold plated list you mentioned having. If you are still willing to send a copy, or if anyone else that got a copy can forward it, I would greatly appreciate it. Since I'm fairly new, and haven't posted the minimum number of times it won't let me PM/email anyone. My email is rileydarren @ johndeere.com Thanks, Darren |
All times are GMT -5. The time now is 06:05 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.