11-29-2010, 03:41 PM | #1 |
Senior Member
Join Date: Jun 2010
Location: New Jersey
Posts: 1,471
|
horn polarity?
Just hooked everything up. As far as I can tell the horn doesn't seem to care about polarity. is this correct?
Also curious if anyone has a good picture of how the stock wiring harness goes from the switch housing to near the radiator. I have it slipped up in between the shell and radiator on drivers side. Seems to look correct but I want to be sure. |
11-29-2010, 03:47 PM | #2 |
Senior Member
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,105
|
Re: horn polarity?
yes on the horn.wire goes behind rad bracket to horn, light across lower rad, should have 3 clips on bottom of rad to hold wire to right head light.
|
Sponsored Links (Register now to hide all advertisements) |
|
11-29-2010, 04:16 PM | #3 |
Senior Member
Join Date: May 2010
Location: Didsbury Alberta
Posts: 838
|
Re: horn polarity?
I don't think the polarity makes a difference, otherwise the contact points would be identified for such.
If they do.....I goof up every time I connect the wires to the horn. Last edited by Glenn C.; 11-29-2010 at 04:23 PM. Reason: Additional comment |
11-29-2010, 05:44 PM | #4 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: horn polarity?
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|