|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-13-2015, 07:20 AM | #1 |
Member
Join Date: Jun 2013
Location: Perth, Western Australia
Posts: 38
|
Gasket for a Snyders 6:1 HC Head
Hi
Any recommendations (part no.) on the best gasket to use for one of these Snyders 6:1 HC Heads? Thanks |
04-13-2015, 08:25 AM | #2 |
Senior Member
Join Date: May 2010
Location: Van, Texas
Posts: 1,122
|
Re: Gasket for a Snyders 6:1 HC Head
call and ask Don Snyder.
|
Sponsored Links (Register now to hide all advertisements) |
|
04-13-2015, 09:45 AM | #3 |
Senior Member
Join Date: Jul 2014
Location: b.c. canada
Posts: 153
|
Re: Gasket for a Snyders 6:1 HC Head
I am not a expert but some say that a copper gasket that matches the head is best I wonder what kind of reply was the above the question was can any body help I thought this forum was to help barners out
|
04-13-2015, 10:08 AM | #4 |
Senior Member
Join Date: May 2010
Location: Amana IA
Posts: 527
|
Re: Gasket for a Snyders 6:1 HC Head
a-bone - Ken's answer was simply to suggest talking to the vendor (in this case Snyder's) since they produce the high compression head, and should be able to recommend the proper head gasket. Many people just don't think of that, or they are looking for more than one suggestion.
__________________
Ron/IA 1929 Fordor Steelback Hawk A Model A Ford Club http://hawkamodelaclub.org/ |
04-13-2015, 12:15 PM | #5 |
Senior Member
Join Date: Jul 2014
Location: b.c. canada
Posts: 153
|
Re: Gasket for a Snyders 6:1 HC Head
not dissing ken I thought there would b more replies sorry ken
|
04-13-2015, 06:37 PM | #6 | |
Member
Join Date: Jun 2013
Location: Perth, Western Australia
Posts: 38
|
Re: Gasket for a Snyders 6:1 HC Head
Sponsored Links (Register now to hide all advertisements)
Quote:
|
|
04-13-2015, 07:13 PM | #7 | |
Senior Member
Join Date: May 2010
Location: Windy City
Posts: 2,919
|
Re: Gasket for a Snyders 6:1 HC Head
Quote:
|
|
04-13-2015, 07:16 PM | #8 | |
Member
Join Date: Jun 2013
Location: Perth, Western Australia
Posts: 38
|
Re: Gasket for a Snyders 6:1 HC Head
Quote:
Thanks MikeK - much appreciated. |
|
04-13-2015, 07:54 PM | #9 |
Senior Member
Join Date: May 2010
Location: Camino, CA.
Posts: 3,086
|
Re: Gasket for a Snyders 6:1 HC Head
I always use copper clad head gaskets and lots of Coppercoat spray.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|