03-08-2012, 02:05 PM | #1 |
Senior Member
Join Date: May 2010
Location: brentwood, ca
Posts: 4,286
|
windwings
What is a fair price for a set of windwings for a closed car with beveled glass? Bob
|
03-08-2012, 02:50 PM | #2 |
Senior Member
Join Date: May 2010
Location: ca.
Posts: 2,522
|
Re: windwings
at least half of new ! or more if you pay shipping .......... steve
__________________
V4f |
Sponsored Links (Register now to hide all advertisements) |
|
03-08-2012, 08:08 PM | #3 |
Senior Member
Join Date: May 2010
Posts: 575
|
Re: windwings
Bob, I picked up a set of wings with Fulton brackets for my Victoria for $85 a few years ago. The glass wasn't etched. I think Brattons sells the closed car brackets for about that, no glass included. Anything around there might be a good deal
Last edited by Vern; 05-30-2020 at 08:08 PM. |
03-09-2012, 01:17 AM | #4 |
Senior Member
Join Date: May 2010
Location: brentwood, ca
Posts: 4,286
|
Re: windwings
The set in question is brass works mfg co., Sf.
A different design from the set vern shows. There is a metal backbone, and the side clips run past the ends of the glass pane. Bob |
03-09-2012, 01:21 AM | #5 |
Senior Member
Join Date: May 2010
Location: brentwood, ca
Posts: 4,286
|
Re: windwings
The holes in vern's door would match the spread of the set I have. The fulton attaches differently. The glass is good and would not need to be replaced.
bob |
03-09-2012, 01:13 PM | #6 |
Senior Member
Join Date: Aug 2010
Location: Grass Valley,CA
Posts: 295
|
Re: windwings
Sponsored Links (Register now to hide all advertisements)
Bruce Davis [email protected] Last edited by 400A-64; 03-11-2012 at 10:57 AM. |
03-09-2012, 01:34 PM | #7 |
Senior Member
|
Re: windwings
Keep in mind the Fultons will NOT WORK on Slant Window cars!!!
__________________
Mark Maron Ill., Region MARC & MAFCA MARC JSC Member MAFFI Trustee National Facebook Admin. https://www.facebook.com/groups/MARC.group/ A7191-Sport Coupe 29 Roadster 29-Town Sedan 29-Original Special Coupe |
03-09-2012, 03:29 PM | #8 |
Senior Member
Join Date: Aug 2010
Location: Grass Valley,CA
Posts: 295
|
Re: windwings
Fulton's were used on my SW 400-A for several years until they were removed by a midnight auto team while we were on an overnight tour!!!
Bruce Davis [email protected] |
03-10-2012, 05:52 PM | #9 |
Senior Member
Join Date: May 2010
Location: brentwood, ca
Posts: 4,286
|
Re: windwings
Bruce, will get a picture to you. Bob
|
03-11-2012, 10:57 AM | #10 |
Senior Member
Join Date: Aug 2010
Location: Grass Valley,CA
Posts: 295
|
Re: windwings
Thanks,Bob! By the way the Auburn swap meet is June 10th.... Sorry folks. thats Auburn California !!!
Bruce Davis [email protected] |
03-11-2012, 09:01 PM | #11 |
Senior Member
Join Date: May 2010
Location: brentwood, ca
Posts: 4,286
|
Re: windwings
I am planning to be at Auburn. Bob
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|