The Ford Barn

johnbuckley · 02-11-2016, 05:42 AM

What door patch panel do I need for my standard 1930 Tudor Is it the same as the 1930-31 closed cab pick up ( Snyders A 436-B) ?

James Rogers · 02-11-2016, 08:14 AM

Yes

Capt Quahog · 02-12-2016, 01:47 AM

Sponsored Links (Register now to hide all advertisements)

Below Belt-Rail "Door Skin".

Found AHOOGA REPRO A & T PARTS to have "BEST" prices and lowest shipping on all types of Model A Ford panels / sheet metal components. I believe that this is the actual company that manufactures this material. No middleman!

Just had one of these delivered . . . Excellent quality and actually heavier grade steel than Henry Ford provided back in 1930.

Was going to use a patch panel but figured this was easier to deal with than trying to surface cut and splice in a lower panel section. These door skins fit both sides of the car. It appears that two notches need to be cut for the door hinges. That to me looks to be a lot easier and less time consuming than fitting a patch panel.

A2552-B, 1930-1931, Ford Model A, Pickup Truck and Tudor Sedan, Door Skin. U.S.A

http://www.ebay.com/itm/321824630148...%3AMEBIDX%3AIT

02-11-2016, 05:42 AM	#1
johnbuckley Senior Member Join Date: Jul 2010 Location: United Kingdom Posts: 1,443	1930 Tudor door bottom patch panel What door patch panel do I need for my standard 1930 Tudor Is it the same as the 1930-31 closed cab pick up ( Snyders A 436-B) ?

02-11-2016, 08:14 AM	#2
James Rogers Senior Member Join Date: May 2010 Location: Asheville,NC Posts: 3,104	Re: 1930 Tudor door bottom patch panel Yes __________________ http://www.model-a-ford-4bangers.com/

02-12-2016, 01:47 AM	#3
Capt Quahog Senior Member Join Date: Jan 2016 Location: Barren windswept mountain somewhere in bleak Northeastern Pennsylvania Posts: 294	Re: 1930 Tudor door bottom patch panel Sponsored Links (Register now to hide all advertisements) Below Belt-Rail "Door Skin". Found AHOOGA REPRO A & T PARTS to have "BEST" prices and lowest shipping on all types of Model A Ford panels / sheet metal components. I believe that this is the actual company that manufactures this material. No middleman! Just had one of these delivered . . . Excellent quality and actually heavier grade steel than Henry Ford provided back in 1930. Was going to use a patch panel but figured this was easier to deal with than trying to surface cut and splice in a lower panel section. These door skins fit both sides of the car. It appears that two notches need to be cut for the door hinges. That to me looks to be a lot easier and less time consuming than fitting a patch panel. A2552-B, 1930-1931, Ford Model A, Pickup Truck and Tudor Sedan, Door Skin. U.S.A http://www.ebay.com/itm/321824630148...%3AMEBIDX%3AIT