The Ford Barn

John1961 · 02-10-2016, 09:19 PM

image.jpg. I found a box of these in a barn along with a box full of model a wheel pullers. Is there any value here?

Deny1950 · 02-10-2016, 09:25 PM

Hi the first and the center one are hand operated drills. There is a small value to the right person guess 25 bucks each maybe more?????

Randy in ca · 02-10-2016, 09:28 PM

Picture is very blurry - hard to tell what the others might be.

John1961 · 02-10-2016, 09:30 PM

Thank you. I was told from a respected older gentleman that they were tools for a flathead motor to clean or grind valves.

John1961 · 02-10-2016, 09:34 PM

They were in a run down barn with lots of other model a and model t parts, (I even pulled out a full model T coupe). I found a box full of these tools and a box full of model A wheel pullers , and a box full of model A fan belts. (Thick). I'm pretty sure that they were for model A or Ts because they were all in veedol oil wood boxes

redmodelt · 02-10-2016, 09:50 PM

Sponsored Links (Register now to hide all advertisements)

Except for the center one (drill) they all are valve grinders of some sort, not Ford per say. Maybe 0 to 15$ depending on condition. List em on Ebay or look on ebay and track selling prices.

John1961 · 02-10-2016, 09:57 PM

Looks like you are correct redmodelt....I looked on ebay and they are valve grinder lapper tools. Thank you!

Tom Wesenberg · 02-10-2016, 11:08 PM

The center one is a breast drill minus the chuck.

I have a small collection of various types of valve lappers. As mentioned, they usually sell for $5 to $25 depending on rarity and condition.

Chris Haynes · 02-12-2016, 04:06 AM

They are for lapping valves. Not for grinding them.

C26Pinelake · 02-12-2016, 04:27 AM

No substantial value. Maybe $50-75 for the lot. Wayne

02-10-2016, 09:19 PM	#1
John1961 Junior Member Join Date: Feb 2016 Posts: 4	Can anyone tell me what these are? image.jpg. I found a box of these in a barn along with a box full of model a wheel pullers. Is there any value here?

02-10-2016, 09:25 PM	#2
Deny1950 Member Join Date: Oct 2015 Location: Manitoba, Canada Posts: 68	Re: Can anyone tell me what these are? Hi the first and the center one are hand operated drills. There is a small value to the right person guess 25 bucks each maybe more?????

02-10-2016, 09:28 PM	#3
Randy in ca Senior Member Join Date: May 2010 Posts: 1,645	Re: Can anyone tell me what these are? Picture is very blurry - hard to tell what the others might be.

02-10-2016, 09:30 PM	#4
John1961 Junior Member Join Date: Feb 2016 Posts: 4	Re: Can anyone tell me what these are? Thank you. I was told from a respected older gentleman that they were tools for a flathead motor to clean or grind valves.

02-10-2016, 09:34 PM	#5
John1961 Junior Member Join Date: Feb 2016 Posts: 4	Re: Can anyone tell me what these are? They were in a run down barn with lots of other model a and model t parts, (I even pulled out a full model T coupe). I found a box full of these tools and a box full of model A wheel pullers , and a box full of model A fan belts. (Thick). I'm pretty sure that they were for model A or Ts because they were all in veedol oil wood boxes

02-10-2016, 09:50 PM	#6
redmodelt Senior Member Join Date: May 2010 Location: Portland OR Posts: 6,340	Re: Can anyone tell me what these are? Sponsored Links (Register now to hide all advertisements) Except for the center one (drill) they all are valve grinders of some sort, not Ford per say. Maybe 0 to 15$ depending on condition. List em on Ebay or look on ebay and track selling prices.

02-10-2016, 09:57 PM	#7
John1961 Junior Member Join Date: Feb 2016 Posts: 4	Re: Can anyone tell me what these are? Looks like you are correct redmodelt....I looked on ebay and they are valve grinder lapper tools. Thank you!

02-10-2016, 11:08 PM	#8
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Can anyone tell me what these are? The center one is a breast drill minus the chuck. I have a small collection of various types of valve lappers. As mentioned, they usually sell for $5 to $25 depending on rarity and condition.

02-12-2016, 04:06 AM	#9
Chris Haynes Senior Member Join Date: May 2010 Location: Camarillo, CA and Pine Grove, CA Posts: 2,832	Re: Can anyone tell me what these are? They are for lapping valves. Not for grinding them. __________________ 1921 Runabout 1930 Tudor Early 1930 AA Speed costs money. How fast do you want to go?

02-12-2016, 04:27 AM	#10
C26Pinelake BANNED Join Date: May 2010 Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto. Posts: 5,800	Re: Can anyone tell me what these are? No substantial value. Maybe $50-75 for the lot. Wayne