|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-02-2024, 04:25 PM | #1 |
Senior Member
Join Date: May 2010
Location: Michigan
Posts: 581
|
Model a Ford Transmission
I put a transmission in my 1931 Ford Pickup figuring it would be more quite. The gears looked good also. When I took it for a drive it locked in high gear. I figure it to be in the shifter top. Any suggestions would be appreciated. Thanks
|
04-02-2024, 10:58 PM | #2 |
Senior Member
Join Date: Aug 2012
Posts: 889
|
Re: Model a Ford Transmission
I would first pull the top. Maybe you didn't get the shift forks line up in the gears correctly.
__________________
The Master Cylinder Enjoying life at the beach in SoCal... |
Sponsored Links (Register now to hide all advertisements) |
|
04-03-2024, 07:24 AM | #3 |
Senior Member
Join Date: Jul 2010
Location: Cow Hampshire
Posts: 4,188
|
Re: Model a Ford Transmission
Sponsored Links (Register now to hide all advertisements)
Or it may not have been "synchronized" going together - and now you're "dead ended" with no where for the shifter arm ball to go next. Pulling the top will reveal all. MANY recommend rebuilding the ball as a routine repair in transmission overhaul - it's probably a good thing to do. But I think in 40 years I've had ONE non-rebuilt ball that continually got hung up by slipping out of the grooves. Joe K
__________________
Shudda kept the horse. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|