Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 07-14-2014, 04:51 PM   #1
Toml
Junior Member
 
Join Date: Oct 2013
Posts: 9
Default 28 A brakes

Rebuilding my brakes and all linkage, just removed this clutch and brake pedals, no bushings, not missing never had them it seems. Normal or no. Also how do you remove the clutch, brake pedal shaft PIN, located on the transmission housing? Thank you Tom
Toml is offline   Reply With Quote
Old 07-14-2014, 07:44 PM   #2
Purdy Swoft
Senior Member
 
Purdy Swoft's Avatar
 
Join Date: May 2010
Location: Alabama
Posts: 8,099
Default Re: 28 A brakes

The pedals used with the multiple disc clutch were used with a smaller 3/4 diameter pedal shaft and used no bushings. The later pedals were used with a 7/8 shaft and the pedals used bushings.
Purdy Swoft is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 07-14-2014, 07:47 PM   #3
Ron in Quincy
Senior Member
 
Ron in Quincy's Avatar
 
Join Date: May 2010
Location: Quincy, CA.
Posts: 1,708
Default Re: 28 A brakes

Sponsored Links (Register now to hide all advertisements)
Sounds like you have multiple disc clutch bell housing. Do your pedals have ribs or smooth faced ? The earliest pedals are smooth and the 2nd generation have ribs. The pedal shaft is smaller. There are no bushings in the pedals with either type.

You probable have what is referred to as "floating brake system" ?


Pictures would help for positive identification.

Ron
Ron in Quincy is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:17 PM.