|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-18-2024, 05:56 AM | #41 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,483
|
Re: Aries Stainless Steel Muffler
This slide may help you.
__________________
Bob Bidonde |
04-18-2024, 06:43 AM | #42 |
Senior Member
Join Date: Jan 2012
Location: Western North Carolina
Posts: 3,910
|
Re: Aries Stainless Steel Muffler
ThosD, I think the performance Ares muffler sounds more like what I remember Model A's sounding like when I was a kid, but I am not sure. I don't hear anything like I did when I was a kid. Without my hearing aids I don't hear anything. I can only comment on the different between the stock manifold and Ares performance muffler and headers with a straight pipe. The performance was the same. I think if you were racing and running the engine at 7,000 rpm the headers would help. The subject of having a tuned exhaust system is a whole different topic.
Jeepguy, My Model T club would have technical sessions where a member would invite the club to their house to discuss some issue with their car. The person hosting the technical session would supply lunch, usually BBQ pork sandwiches.
__________________
A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past. Last edited by nkaminar; 04-18-2024 at 06:50 AM. |
Sponsored Links (Register now to hide all advertisements) |
|
04-18-2024, 11:00 AM | #43 |
Senior Member
Join Date: May 2010
Location: Santee Calif.
Posts: 511
|
Re: Aries Stainless Steel Muffler
|
04-18-2024, 12:16 PM | #44 |
Senior Member
Join Date: Sep 2022
Location: SoCal
Posts: 591
|
Re: Aries Stainless Steel Muffler
SS is not like regular steel that hardens if you quench it after heating.
Unlike martensitic steels, the austenitic stainless steels are not hardenable by heat treatment as no phase changes occur on heating or cooling. Softening is done by heating in the 1050/1200°C range, ideally followed by rapid cooling. |
04-19-2024, 07:50 AM | #45 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,483
|
Re: Aries Stainless Steel Muffler
Hi Phil!
There is a clamp with a non-metallic liner available that should make an improvement.
__________________
Bob Bidonde |
|
|
Sponsored Links (Register now to hide all advertisements) |
|