|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-29-2023, 02:31 PM | #1 |
Member
Join Date: May 2010
Location: rochester Michigan
Posts: 78
|
Split rims how tight
I recently had my wheels respoked (21" split rim). I am mounting the rims on the felloes with 4 lug nuts per wheel. Rims do not want to go up tight against the steel felloe. How tight should the lugs be against the felloe? Somewhere I read a 3/8" was acceptable. If I cross pattern tighten the lugs and take them to 50# torque is that sufficient? I recall that you can bend a wood spoked wheel by trying to force the matter.
Any thoughts? |
08-29-2023, 09:59 PM | #2 |
Senior Member
Join Date: May 2010
Location: Portland OR
Posts: 6,346
|
Re: Split rims how tight
Sponsored Links (Register now to hide all advertisements)
__________________
I know the voices aren't real but damn they have some good ideas! |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|