|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-28-2010, 10:34 AM | #1 |
Senior Member
Join Date: May 2010
Location: Gaithersburg, Maryland
Posts: 518
|
Conduit Clip at Firewall
Does someone have an image of the clip that is used to hold the metal wiring conduit to the firewall.
I noticed the reproduction clips have "two legs" that the conduit snaps in between. I have had I think to be a couple of original clips and these do not have the two legs but have a C shape that simply goes over conduit. Which is correct? |
12-28-2010, 11:10 AM | #2 |
BANNED
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
|
Re: Conduit Clip at Firewall
The one with "two legs" (A-14576: Terminal box to generator conduit clip--upper)...it is a special clip unlike the ones that holds the speedometer cable to the fire wall AND the one (A14577:Terminal box to generator conduit clip--lower) that attaches the metal conduit to the A-8275 Cylinder Water Inlet Connection. These two are the same for 28-29 early 30 BUT somewhat different for mid 30-31 (I think) Sorry...no photo.
Pluck |
Sponsored Links (Register now to hide all advertisements) |
|
12-28-2010, 01:49 PM | #3 |
Senior Member
Join Date: May 2010
Location: Richmond, VA
Posts: 882
|
Re: Conduit Clip at Firewall
OK, ignore the modern plugs! Trying to show the '2 leg' clip for Hunter ...
|
12-28-2010, 04:58 PM | #4 |
Senior Member
Join Date: May 2010
Location: Gaithersburg, Maryland
Posts: 518
|
Re: Conduit Clip at Firewall
Sponsored Links (Register now to hide all advertisements)
Thanks - Hunter |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|