Problem with Horn brushes

[firechief5215]

Last week I posted a post on how to rebuild my Spartan horn . I received great feedback . I took it apart today to find the brushes positioned on a angle. After looking further I realized that the plate that holds the brush holders is warped. The horn adjuster is about 1/8-1/4 inch from the plate so it wasn't turned in to far , I think I can replace this plate but I cannot locate one in my books. What would cause this. It doesn't look or smell like it I burnt, looked almost new inside Again Thanks for all your help Billy

[spike]

snyders or A&L will have the parts you will need. Call A&L and talk to al jr.

[Ron in Quincy]

A&L Parts Specialties phone number: 860-693-0112. They are located in Canton, Conn. not that far from you. They have all the piece parts for horns including different horn covers. The quality is excellent.

Ron

[Mike V. Florida]

Sponsored Links (Register now to hide all advertisements)

Here is the page from the catalog;