The Ford Barn

David BB 33 · 07-01-2015, 07:55 PM

I will try to attach a couple of photos of the '33 dump truck. I need to sort out overheating ammeter wiring before I put the fenders and lights on, and it still needs some detailing like painting the rear lugs and grease caps, plus the pin striping. Nearly done, and as John said, lots of thanks for the help from many of you.

David

Well, I didn't figure out how to submit the photos. Later, I hope.

RUNNERBUN · 07-01-2015, 09:42 PM

Hi David BB, for instructions on uploading pictures try this link. I think you will find it most helpful.
http://www.fordbarn.com/forum/showth...ading+pictures

Good luck.

David BB 33 · 07-02-2015, 06:15 PM

Thanks Runnerbun - I will take a look and hopefully be able to post them.

David

David BB 33 · 07-02-2015, 06:21 PM

If the three photos appear, it is Thanks to Runnerbun.

RUNNERBUN · 07-02-2015, 07:40 PM

Thank you for the compliment David BB, but the real credit belongs to member pgerhardt
who took the time to post the detailed instructions.

Congratulations on a nice looking truck. Obviously many hours in the workshop now paying off. Enjoy the fruits of your labour.

David BB 33 · 07-02-2015, 08:40 PM

Sponsored Links (Register now to hide all advertisements)

You are right, Runnerbun - thanks for pointing this out. And so, thanks to pgerhardt for the helpful guidance.

mshmodela · 07-02-2015, 09:16 PM

Quote:

Originally Posted by david bb 33

if the three photos appear, it is thanks to runnerbun.

totally awesome!

ckulchar · 07-03-2015, 11:04 PM

Quote:

Originally Posted by mshmodela

totally awesome!

You can say that again! Very nice.

Charley

Mike V. Florida · 07-03-2015, 11:10 PM

Very nice.

07-01-2015, 07:55 PM	#1
David BB 33 Member Join Date: Oct 2014 Location: Medford MA Posts: 42	Another Big Truck I will try to attach a couple of photos of the '33 dump truck. I need to sort out overheating ammeter wiring before I put the fenders and lights on, and it still needs some detailing like painting the rear lugs and grease caps, plus the pin striping. Nearly done, and as John said, lots of thanks for the help from many of you. David Well, I didn't figure out how to submit the photos. Later, I hope. Last edited by David BB 33; 07-01-2015 at 07:57 PM. Reason: Incompetence

07-01-2015, 09:42 PM	#2
RUNNERBUN Senior Member Join Date: Nov 2011 Location: Queensland Australia Posts: 640	Re: Another Big Truck Hi David BB, for instructions on uploading pictures try this link. I think you will find it most helpful. http://www.fordbarn.com/forum/showth...ading+pictures Good luck. __________________ Adjust your points with gentle blows of a 2 pound hammer

07-02-2015, 06:15 PM	#3
David BB 33 Member Join Date: Oct 2014 Location: Medford MA Posts: 42	Re: Another Big Truck Thanks Runnerbun - I will take a look and hopefully be able to post them. David

07-02-2015, 07:40 PM	#5
RUNNERBUN Senior Member Join Date: Nov 2011 Location: Queensland Australia Posts: 640	Re: Another Big Truck Thank you for the compliment David BB, but the real credit belongs to member pgerhardt who took the time to post the detailed instructions. Congratulations on a nice looking truck. Obviously many hours in the workshop now paying off. Enjoy the fruits of your labour. __________________ Adjust your points with gentle blows of a 2 pound hammer Last edited by RUNNERBUN; 07-02-2015 at 07:46 PM.

07-02-2015, 08:40 PM	#6
David BB 33 Member Join Date: Oct 2014 Location: Medford MA Posts: 42	Re: Another Big Truck Sponsored Links (Register now to hide all advertisements) You are right, Runnerbun - thanks for pointing this out. And so, thanks to pgerhardt for the helpful guidance.

07-03-2015, 11:10 PM	#9
Mike V. Florida Senior Member Join Date: May 2010 Location: South Florida Posts: 14,054	Re: Another Big Truck Very nice. __________________ What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II