The Ford Barn

SPRYSTANG · 08-31-2012, 03:53 PM

Found two nos exhaust manifolds still in the ford boxes, but dont know what they fit. They look like ram horns for a y block, but not sure. Can someone decode these numbers? Cote-9430-a and eam-9430-d. Any help apprciated. Thanks

scicala · 08-31-2012, 08:46 PM

Hello Sprystang, It sounds like you may have Rams Horn manifolds for a Ford Y-Block (COTE-9430-A / 1960 Ford truck 292) and a Lincoln Y-Block truck engine (EAM designates 317 Lincoln V8). If the bolt centers for the mounting holes are all in a straight line with each other, it's for a 292. If the bolt centers are at an angle on the outside ports, it's for a Lincoln 317 truck engine. Sal Cicala.

streetdreams · 08-31-2012, 08:48 PM

If the mounting holes are straight across, they're for a Y Block. If the end holes are angled top corner to bottom corner on the ends, they're for a Lincoln truck motor. Looks like you may have one of each engine. The C0TE looks like Y Block, the EAM like Lincoln. The same base number 9430 means they're the same side manifolds.

Gerry · 09-01-2012, 10:30 AM

Picture of lincoln ram horn...
http://www.fordbarn.com/forum/album....ictureid=16495

SPRYSTANG · 09-01-2012, 02:18 PM

Thanks guys, i really appreciate it. Dont look like they will work for my application though. Any idea what they are worth ? Thanks

Gerry · 09-01-2012, 03:08 PM

Sponsored Links (Register now to hide all advertisements)

Not really much as I remember not popular unless you have a big truck.

The Master Cylinder · 09-01-2012, 04:12 PM

If you have a set of Rams Horns for a 292 Y-Block they can be used on 50's F-100's to get rid of their single exhaust. Try over on Ford Truck Enthusiast Forum to see if anyone is wants them.

Speedway is selling them new for ~$380 so you should be able to sell them if they are in good shape. Ford Ram Horn Manifolds

08-31-2012, 03:53 PM	#1
SPRYSTANG Senior Member Join Date: May 2010 Posts: 272	Ford manifold part number id Found two nos exhaust manifolds still in the ford boxes, but dont know what they fit. They look like ram horns for a y block, but not sure. Can someone decode these numbers? Cote-9430-a and eam-9430-d. Any help apprciated. Thanks

08-31-2012, 08:46 PM	#2
scicala Senior Member Join Date: Jun 2010 Location: Detroit suburb, MI Posts: 3,706	Re: Ford manifold part number id Hello Sprystang, It sounds like you may have Rams Horn manifolds for a Ford Y-Block (COTE-9430-A / 1960 Ford truck 292) and a Lincoln Y-Block truck engine (EAM designates 317 Lincoln V8). If the bolt centers for the mounting holes are all in a straight line with each other, it's for a 292. If the bolt centers are at an angle on the outside ports, it's for a Lincoln 317 truck engine. Sal Cicala.

08-31-2012, 08:48 PM	#3
streetdreams Senior Member Join Date: Dec 2010 Location: Howell, Michigan, USA, The Peoples Slightly Overspent Demodependancy of Michigan Posts: 638	Re: Ford manifold part number id If the mounting holes are straight across, they're for a Y Block. If the end holes are angled top corner to bottom corner on the ends, they're for a Lincoln truck motor. Looks like you may have one of each engine. The C0TE looks like Y Block, the EAM like Lincoln. The same base number 9430 means they're the same side manifolds.

09-01-2012, 10:30 AM	#4
Gerry Senior Member Join Date: May 2010 Location: Lake Forest, Southern California. Posts: 148	Re: Ford manifold part number id Picture of lincoln ram horn... http://www.fordbarn.com/forum/album....ictureid=16495

09-01-2012, 02:18 PM	#5
SPRYSTANG Senior Member Join Date: May 2010 Posts: 272	Re: Ford manifold part number id Thanks guys, i really appreciate it. Dont look like they will work for my application though. Any idea what they are worth ? Thanks

09-01-2012, 03:08 PM	#6
Gerry Senior Member Join Date: May 2010 Location: Lake Forest, Southern California. Posts: 148	Re: Ford manifold part number id Sponsored Links (Register now to hide all advertisements) Not really much as I remember not popular unless you have a big truck.

09-01-2012, 04:12 PM	#7
The Master Cylinder Senior Member Join Date: Aug 2012 Posts: 886	Re: Ford manifold part number id If you have a set of Rams Horns for a 292 Y-Block they can be used on 50's F-100's to get rid of their single exhaust. Try over on Ford Truck Enthusiast Forum to see if anyone is wants them. Speedway is selling them new for ~$380 so you should be able to sell them if they are in good shape. Ford Ram Horn Manifolds __________________ The Master Cylinder Enjoying life at the beach in SoCal... Last edited by The Master Cylinder; 09-01-2012 at 04:18 PM.