Cling adaptor

[Dtolson9]

Hello. I just installed a clings adapter and a 1939 trans in my model a. When I hooked the clutch pedal up it just falls to the floor. Opened the inspection plate and noticed that the throw out bearing isn’t touching the fingers. The fingers have no play in them when I push them with a screwdriver like the throw out bearing would. Any ideas what could be wrong not? Clutch and pressure plate are new

[Dtolson9]

Here’s some pictures

[fordfarm]

Need to adjust the clutch rod. Just went through that process with a v8 pressure plate'
John

[Ordsgt]

I hate to say this but just saw a similar issue and it was the clutch plate installed backwards

[Dtolson9]

Can’t the clutch only go on one way? It sits flush one way and not flush the other.

[Dtolson9]

Sponsored Links (Register now to hide all advertisements)

Here’s the clutch

[katy]

Got a picture of the clutch linkage?

[Dtolson9]

This is all I have with me

[Dtolson9]

Linkage