|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-17-2010, 03:15 PM | #1 |
Junior Member
Join Date: Jun 2010
Location: Fort Worth, Texas
Posts: 10
|
ECZ-G Y-Block Heads
Can someone tell me if there is a cc or valve size difference in the small letter ECZ-G and the large letter ECZ-G Y-block heads? Thanks, Jim Griffith
|
06-17-2010, 03:48 PM | #2 |
Junior Member
Join Date: May 2010
Location: So-Cal
Posts: 21
|
Re: ECZ-G Y-Block Heads
They are the same.The replacement "113" heads had a larger 72cc chamber vs. the 69cc of the "G" heads. You can find all the info for these at ford-y-block.com
__________________
A bad day surfing is better than a good day at work!!! |
Sponsored Links (Register now to hide all advertisements) |
|
06-17-2010, 06:05 PM | #3 |
Junior Member
Join Date: Jun 2010
Location: Fort Worth, Texas
Posts: 10
|
Re: ECZ-G Y-Block Heads
Thanks Chalupa55. I have one small letter and one large letter and was concerned about mixing them. Jim Griffith
|
06-18-2010, 07:20 AM | #4 |
Senior Member
Join Date: May 2010
Location: St. Michael, Minnesota
Posts: 1,713
|
Re: ECZ-G Y-Block Heads
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|