|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-19-2010, 11:45 AM | #1 |
Senior Member
Join Date: May 2010
Location: near Hershey, PA
Posts: 875
|
1928-1929 Fuel Tank "Spill Box"
I've been looking for an accessory spill box for quite some time now.
My dad and I are trying to recreate a car that was built into a race car just after WWII. Unfortunately for us, it had one of these boxes on it. I received a few bits of info a while back and it seems as though they are 5" x 9" have a hinge in the back. Held to the tank by a big nut that replaces the gas cap. then the lid of the "box" has cork or a ball to seal against the top of the fuel filler neck.. There was a mat in the bottom to absorb any spilled fuel, to save from running down the cowl of your car. Does anyone have any more info on these, who produced them, etc. Not to add the spam to this thread, but I am seriously looking for one if you know of any that could be bought. thanks alot Zach
__________________
-WANTED-
Pre-War Speed Equipment Davies or Morrison Intake Manifold 77-6050B, 81AS - 81SB - 99AS - 99SB 19AS cylinder heads |
10-20-2010, 08:25 PM | #2 |
Senior Member
Join Date: May 2010
Location: near Hershey, PA
Posts: 875
|
Re: 1928-1929 Fuel Tank "Spill Box"
Anyone even ever seen one?
__________________
-WANTED-
Pre-War Speed Equipment Davies or Morrison Intake Manifold 77-6050B, 81AS - 81SB - 99AS - 99SB 19AS cylinder heads |
Sponsored Links (Register now to hide all advertisements) |
|
10-20-2010, 08:48 PM | #3 |
Senior Member
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,104
|
Re: 1928-1929 Fuel Tank "Spill Box"
didn't model T's have something like that?lower right hand corner is that it??
Last edited by Gary WA; 05-20-2011 at 06:07 PM. |
10-20-2010, 08:57 PM | #4 |
Senior Member
Join Date: May 2010
Location: Quincy, CA.
Posts: 1,708
|
Re: 1928-1929 Fuel Tank "Spill Box"
Thats what I was thinking, have seen same on Model T; maybe someone adapted it to the Model A ?
Ron |
10-20-2010, 09:00 PM | #5 |
Senior Member
Join Date: May 2010
Location: Vici,Okla.
Posts: 256
|
Re: 1928-1929 Fuel Tank "Spill Box"
26-7`s mite have what your lookin for however they are sodered to the tank
|
10-20-2010, 10:20 PM | #6 |
Senior Member
Join Date: May 2010
Location: near Hershey, PA
Posts: 875
|
Re: 1928-1929 Fuel Tank "Spill Box"
Sponsored Links (Register now to hide all advertisements)
I guess we will likely have to just make one...
__________________
-WANTED-
Pre-War Speed Equipment Davies or Morrison Intake Manifold 77-6050B, 81AS - 81SB - 99AS - 99SB 19AS cylinder heads |
10-21-2010, 09:50 AM | #7 |
Junior Member
Join Date: May 2010
Location: San Antonio,Texas
Posts: 1
|
Re: 1928-1929 Fuel Tank "Spill Box"
Vent-o Gas cap The instructions: Remove the present Gas Cap. Place the opened improved Gas Cap over the Nipple ___ the hinged side towards the windshield.
Screw the NUT down until about 1/8 inch or more of the threaded nipple extends. To open the Vent-o-Gas Cap press the buttom and lift the cover until it rest on the stop in the rear. Commerical Manufacturing Co - 821 R F E S S T R E E T -Chicago, ILL |
10-21-2010, 10:06 AM | #8 |
Senior Member
Join Date: May 2010
Location: near Hershey, PA
Posts: 875
|
Re: 1928-1929 Fuel Tank "Spill Box"
Thanks John...
that sure sounds like it... where did you find that? Zach
__________________
-WANTED-
Pre-War Speed Equipment Davies or Morrison Intake Manifold 77-6050B, 81AS - 81SB - 99AS - 99SB 19AS cylinder heads |
10-21-2010, 10:34 AM | #9 |
Senior Member
Join Date: May 2010
Location: ⓉⒺXⒶⓈ
Posts: 2,047
|
Re: 1928-1929 Fuel Tank "Spill Box"
There is a guy here in the Dallas Model A club that is an accessory nut and he presented a seminar at the world meet a few years back and had one. He seemed very fond of it.
Bummer thing is that if one was sitting on a shelf in grandpa's garage and the relatives came in to clean it out, it would look like nothing important and probably hit the trash. I'll ask him about it when I see him again and see if he has more than one, or if he's in the mood to sell.
__________________
-------------- Drive it like you know how to fix it! DMAFC / OILERS CC-MC Last edited by Jason in TX; 10-21-2010 at 10:42 AM. |
10-21-2010, 11:03 AM | #10 |
Senior Member
Join Date: May 2010
Location: near Hershey, PA
Posts: 875
|
Re: 1928-1929 Fuel Tank "Spill Box"
Thanks Elrod...
I've been figuring we'd find one at Hershey... laying in the junk piles... but haven't had any luck in a few years of hunting now.. I appreciate any help... even if the guy would be willing send along some photos and dimensions... I have basic but more detail to reproduce it would help A LOT! The car that its going to go on... is coming along slowly but surely... its a shame that it had this... its not that attractive of an accessory... but it stands out on the car... Thanks Zach [email protected]
__________________
-WANTED-
Pre-War Speed Equipment Davies or Morrison Intake Manifold 77-6050B, 81AS - 81SB - 99AS - 99SB 19AS cylinder heads |
10-21-2010, 11:23 AM | #11 | |
Senior Member
Join Date: Oct 2010
Location: Ellis County, Texas
Posts: 337
|
Re: 1928-1929 Fuel Tank "Spill Box"
Quote:
Tex has one on his "service truck" also. I'll ask Bob tomorrow and see if he knows where another one is. |
|
10-21-2010, 11:30 AM | #12 |
Senior Member
Join Date: May 2010
Location: ⓉⒺXⒶⓈ
Posts: 2,047
|
Re: 1928-1929 Fuel Tank "Spill Box"
Yeah. I was referring to Vernon. I'm sure I'll see Tex in Winnsboro this weekend and can take a ton of pictures of the one on the Service truck if you want me to Zach.
__________________
-------------- Drive it like you know how to fix it! DMAFC / OILERS CC-MC |
10-21-2010, 11:34 AM | #13 |
Senior Member
Join Date: May 2010
Location: near Hershey, PA
Posts: 875
|
Re: 1928-1929 Fuel Tank "Spill Box"
If you don't mind the effort... any and all pictures and measurements would help immensely if I can't buy one...
Thanks alot! Zach
__________________
-WANTED-
Pre-War Speed Equipment Davies or Morrison Intake Manifold 77-6050B, 81AS - 81SB - 99AS - 99SB 19AS cylinder heads |
10-21-2010, 12:07 PM | #14 | |
Senior Member
Join Date: Oct 2010
Location: Ellis County, Texas
Posts: 337
|
Re: 1928-1929 Fuel Tank "Spill Box"
Quote:
I think the one that Vernon had was off of a brown coupe. And I can't remember the fellow's name that owns it. Vernon will remember who it is. |
|
10-21-2010, 01:24 PM | #15 |
Member Emeritus
Join Date: May 2010
Location: Madison, NJ
Posts: 5,230
|
Re: 1928-1929 Fuel Tank "Spill Box"
A research possibility...first, find out if the device or any information the accessory guy has contains a patent number. If not, do some searching on Google advanced patents
Set the patent application date to a reasonable range, I'd try 1926 since possible late T connections, to 1935 or so...and try different combinations of key words, with and with out "Ford"...fuel, gasoline, tank, spill, etc. If there is a patent to be found there will be some good drawings and details of the inner cap/clamp arrangement. |
10-22-2010, 08:57 AM | #16 |
Senior Member
Join Date: May 2010
Location: near Hershey, PA
Posts: 875
|
Re: 1928-1929 Fuel Tank "Spill Box"
Thanks Bruce
I've actually looked there a bit... without much luck... Found the Ford standard type cap.... I keep going back over and trying new ideas when I get time.... Zach
__________________
-WANTED-
Pre-War Speed Equipment Davies or Morrison Intake Manifold 77-6050B, 81AS - 81SB - 99AS - 99SB 19AS cylinder heads |
|
|
Sponsored Links (Register now to hide all advertisements) |
|